Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Route the display cable along the routing guides, starting from the bottom of the display (near the hinges).
2. Route the rest of the display cable along the routing guides on the left side of the display back-cover and antenna assembly.
3. Slide the camera cable into the connector on the camera module to secure the cable.
Post-requisites
1. Replace the
display
hinges.
2. Replace the
display
panel.
3. Replace the
display
bezel.
4. Replace the
display
assembly.
5. Replace the
wireless
card.
6. Replace the
base
cover.
88
Replacing the display cable
Replacing the display cable
computer. After working inside your computer, follow the instructions in
51
After
Advertisement
Table of Contents
