Table of Contents
Advertisement
SF/SG Series Operating Instructions
Note about keyboard TARE:
1. If you enter a tare weight greater than the weighing capacity of the scale an error message
Err tr
"
will display:
2. When a TARE weight has been set, it is not possible to set a new TARE weight of a lower value by the
instructions above. It is necessary to delete the previous TARE first, before entering a TARE of lower value.
Example
WEIGHT
0.000
0.000
0.000
0.000
NET ZERO
3. Any previous TARE entries will be cancelled when the
4.
To cancel a TARE weight that has been entered, remove any weight from the weigh pan
and press
T
TARE
4. Setting Unit Price
1. Enter Unit Price by 10 key pad. Up to 6 digits may be entered.
The example below shows the entry of a unit price of $5.50:
WEIGHT
0.000
0.000
0.000
0.000
NET ZERO
2. Unit price entry must be completed within 3 seconds. Any delay beyond 3 seconds
will require the unit price to be re-entered.
"
UNIT PRICE
------
------
------
------
UNIT PRICE
5.50
5.50
5.50
5.50
0
key is pressed.
ZERO
PRICE
Err tr
PRICE
0.00
0.00
0.00
0.00
7
Advertisement
Table of Contents
