Setting The Unit - A&D UC-351PBT-Ci Instruction Manual

Setting the Unit

Confirm that the scale is
1.
turned off, and press
and hold the setting
switch.
 When the setting switch is
continuously pressed, "unit" and
"uPr" are alternately displayed.
Release the setting
2.
switch when "unit" is
displayed.
 The display changes from "unit" to
display the unit that is currently set.
Press the setting switch
3.
to select the unit that
you want to set.
 The unit changes each time the
setting switch is pressed.
 Wait for 3 seconds after setting the
unit.
Confirm that "End" is
4.
displayed.
 The settings are saved.
 After three seconds of
non-operation, the scale confirms
the selected unit with two beeps,
displays "End " and automatically
turns off.
English 8
≪♪Beep≫
≪♪Beep≫
k g
k g
lb
≪♪Beep beep≫