Setting The Unit - A&D UC-355PBT-Ci Instruction Manual

Setting the Unit

Confirm that the scale is
1.
turned off, and press and
hold the

When the switch is
continuously pressed, "unit" and
"uPr" are alternately displayed.
Release the
2.
when "unit" is displayed.
 The display changes from "unit" to
display the unit that is currently set.
Press the
3.
select the unit that you
want to set.
 The unit changes each time the
switch is pressed.
 Wait for 3 seconds after setting the
unit.
Confirm that "End" is
4.
displayed.
 The settings are saved.
 After three seconds of
non-operation, the scale confirms
the selected unit with two beeps,
displays "End " and automatically
turns off.
switch.
switch
switch to
English 8
Beep
Beep
k g
k g
lb
Beep beep