SF/SG Series Operating Instructions
12. Automatic Cancellation of Unit Price
In very busy applications, it may be more convenient for the Unit Price entry to return to zero after each
operation. (F2 should be "0".)
To do this, press the
WEIGHT
WEIGHT
While the display shows the above, press
13. Setting "F" Functions
"F" functions allow the programming of various functions of the SF/SG Price Computing scales. Following
is a brief description of these functions and how to program them.
Step 1: Starting with the power off, hold
Step 2: Press
Step 3: Using the 10 key pad and the
the various settings for each "F" function. Press
to move to the next "F" function.
Use
F1: Auto display off
F2: Cancellation of unit price
F3: Output Data
F4: Baud Rate
F5: Parity Bit
key while the display is in normal operation.
1
CHANGE
PRICE
UNIT PRICE
•ut ut ut ut • c c c c
TOTAL M+
PRICE
UNIT PRICE
Ut
Ut
nc
nc
Ut
Ut
nc
nc
TOTAL M+
*
to select the desired "F" function group.
C
to store each setting selected.
MEM
Automatically clears unit price.
Does not automatically clears unit price.
again to change the setting.
1
CHANGE
0
and turn on the power switch
ZERO
WEIGHT
Displays
key, select and cancel
*
0: Yes
1: No
0: Selectable
1: No
0: Print key mode A 1: Print key mode B
2: Command mode 3: Stream mode
0: 600 bps
1: 1200 bps
2: 2400 bps
3: 4800 bps
0: 7 bits (Even)
1: 8 bits (No parity)
PRICE
UNIT PRICE
•F F F F 1 1 1 1 - - - - ••
TOTAL M+
UNIT PRICE
F1-0
F 1 - 0
F 1 - 0
F 1 - 0
F 1 - 0
F2-0
F5-0
F3-0
F4-0
Settings
2: Yes
4: 9600 bps
11