Setting The Unit - A&D UC-352BLE Instruction Manual

Setting the Unit

1. Confirm that the scale is turned off, and press the Set
switch.
2. Press the Set switch to select the unit that you want to
set.
The unit changes each time the Set switch is
pressed.
Wait for three seconds after setting the unit.
3. Confirm that "end" is displayed.
The settings are saved.
After three seconds of non-operation, the scale
confirms the selected unit with two beeps,
displays "end" and automatically turns off.
Note: Changing the unit will delete any stored readings in
the scale memory. Be sure to transfer them to your
mobile device before changing the unit.
English 8
Beep
Beep beep