Menu Settings; Menu Control (Dtv Mode); Picture Menu; Sound Menu - Strong SRT 24HY4003 User Manual

An updated schedule list will be shown.

5.0 MENU SETTINGS

5.1 Menu control (DTV mode)

Press MENU to enter the main menu. Press   to select an item. Press ENTER to enter the item. Press
  and ENTER to select the submenus. Press MENU to exit the item.

5.2 Picture menu

Picture Mode
Colour Temperature
Aspect Ratio
Noise Reduction
MPEG NR

5.3 Sound menu

Sound Mode
Bass
Treble
Balance
Auto Volume
Surround Sound
AD Switch

5.4 Channel

5.4.1 Auto Tuning (in DVB-T mode only)
First select the Tune Type by pressing   to select DVB-T, ATV or DVB-T+ATV (DVB-T to search digital
broadcasts and ATV to search analogue broadcasts). Press  to continue. Press    to highlight
the country that you want to install, then press ENTER to start searching.
Select the automatic picture control mode. Available choices are Dynamic,
Standard, Mild and User. In the User mode, settings can be changed for
Brightness, Contrast, Colour, Tint and Sharpness.
Select the overall colour tone of the picture. Available choices are Cool,
Medium, Warm and User. In User mode, settings can be changed for Red, Green
and Blue.
Select the aspect ratio (display proportions) according to your video signal
type or preference. Available choices are 16:9, 4:3, Just Scan, Zoom1 and
Zoom2. Note: Some options may not be available under some sources.
Eliminates noise in the picture. Available choices are O , Low, Middle and High.
Eliminates noise generated while creating digital picture signals. Available
choices are O , Low, Middle and High.
Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and User.
Adjusts the lower frequency of the sound.
Adjusts the higher frequency of the sound.
Control the sound balance between the right and left loudspeaker
(earphone).
Adjust the volume corresponding to the input audio level. Options are On and
O .
Turns on the Sound Retrieval System.
Turn on the Audio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only
available in DTV mode.)
9