Table of Contents
Advertisement
Service Type
It is recommended to use the default settings.
3.2 DVB-T installation
Terrestrial Setting
First select the Tune Type by pressing to select DVB-T, ATV or DVB-T+ATV (DVB-T to search digital
broadcasts and ATV to search analogue broadcasts). Press to continue. Press to highlight
the country that you want to install, then press ENTER to start searching.
NOTE:
3.3 DVB-C installation
Cable Setting
First select the Tune Type by pressing to select DVB-C, ATV or DVB-C+ATV (DVB-C to search digital
broadcasts and ATV to search analogue broadcasts). Press to continue. Press to highlight
the country that you want to install, then press ENTER to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE EPG
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and
o ers information on broadcasted programmes. You can access it in digital mode by pressing EPG on
the remote control. Press EPG to bring up the EPG interface. The second bar from the top will display
the current date and time. On the list below, the channel you are currently watching will be highlighted.
Before you can view any EPG information, you have to 'activate' every channel for which you want to
view programme information. To do this, use to select a channel, then press ENTER to con rm.
To check programmes which will be broadcasted on a future date, scroll up to the date eld with . Use
to select the date you want to check. Press 2 to scroll up to the top bar in the display, then press
to select the Channel List. The second bar will then display one of your available channels. Go to
the channel for which you want to view information using . After a brief moment, the programme
information will appear. Use to scroll through the time slots. Press MENU to exit the EPG menu.
4.3.1 Info
Press the GREEN button to show information about the selected programme.
4.3.2 Schedule
Press the YELLOW button to display the Schedule List. Press to select an event, press the RED button
to delete an event.
4.3.3 Remind
Press the BLUE button to display a reminder menu. Press to select an item and to change the
setting. Press ENTER to add the reminder event to the schedule list.
8
Select DTV to search DTV channels only, RADIO to search radio channels only
or All for a complete search.
If you have an active antenna, turn it on by following the instructions in
paragraph 5.4.5 and then repeat the scan.
Advertisement
Table of Contents
