Troubleshooting - Strong SRT 24HY4003 User Manual

This menu only shows supported les.

Files with other le extensions are not displayed, even if they are saved on the same USB

storage device.
An over-modulated mp3 le may cause some sound distortion during playback.

This TV supports lyrics display (in English). The maximum number of characters per line is 48.

The le name of music and lyrics must be the same in order to display lyrics while the music is

playing.
If you want to show the associated lyrics on the screen with the music, you must store these in

the same folder using the same le name with ".Irc" le extensions.
6.2.3 Browse photos
Press INFO or  to display/exit from the menu bar (Fig. 8). Press the USB control buttons on the remote
control to do relevant operations.
Play & Pause/Stop/Previous/Next
Repeat
Info
Rotate
Zoom In/Zoom Out
Move View
NOTE:

7.0 TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for
the problem you are experiencing. If the TV does not work properly after checking it, please contact
your local service line or STRONG dealer. Alternatively you can send a support mail via our website
www.strong.tv.
Problem
No picture,no sound
14
Press  2 to play or pause the playback. Press 3 to stop playing. Press 7 8
to show the previous or the next picture. Press   to highlight the icon on
the control bar, and then press ENTER. The TV will response accordingly.
Highlight the icon and press ENTER. You can select 3 di erent modes: None
to disable the function, 1 to repeat one track only and All to repeat the entire
list once it is nished.
Highlight the button and press ENTER to check the information of the shown
photo.
Highlight the icon in the menu bar and press ENTER to rotate the picture
90 degrees clockwise or counter clockwise.
Highlight the icon on the menu bar and press ENTER to zoom in or zoom out
of the image.
When the image is magni ed, use this function for convenient check.
Highlight this icon, press ENTER, then press   to move the image.
The move function
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make sure it
is working or turned on.
3. The power plug is in bad contact with the outlet
4. Check the signal source.
is only available when the image is enlarged.
Possible cause and solution
Fig. 8