Operation For Tare Subtraction - Scale House GAI420 Operation Manual

3.3 Operation for Tare Subtraction

1 Place the tare (container) on the balance.
2 Reset read-out indication to zero.
3 Load the sample to be weighed.
☆ Weighing only the weight of an added sample
4 Resetting the indication to zero
5 Adding samples to be measured
14
As you place the tare, the balance
indicates its weight.
Press the Zero/Tare key.
The tare is subtracted and the
balance indicates zero.
The balance will now indicate only
the weight of the sample loaded in
the tare.
Press the Zero/Tare key.
The total weight of the sample
loaded on the measurement pan is
indicated as zero.
The balance indicates only the
weight of an added sample.
When the weight (of a sample)
currently loaded on the
measurement pan is reset to zero
with the Zero/Tare key, as
mentioned above, only the weight of
the sample will be measured.