Table of Contents
Advertisement
☆ Key Points of the Procedure ☆
1.
While samples are being saved, the value indication disappears temporarily, and only the [M] mark flashes. If the
balance is affected by wind or other vibrations during this process, the saving time may be prolonged.
2.
If [L-Err] appears briefly, it indicates one of the following states:
(1)
The weight of the reference sample is insufficient.
For the limit weight that can be saved (% limit weight), please refer to "14. Specifications," on page 42.
(2)
While setting up the reference value in Step 2, the
loaded on the balance.
※If [L-Err] appears, sampling has been interrupted and the sample value being processed will not be saved.
3.
The minimum intervals between percentages in the unit switch from 1%, to 0.1%, to 0.01%, depending on the
reference weight from the sampling.
Unit weight measured in counting mode and percentage.
Model
Unit weight measured in
counting mode [g]
Minimum weight in
percentage mode [g]
GAI
GAI 2200
0.01
1
Set key has been pressed while the samples were
GAI 4200
0.01
1
25
Hide quick links:
Advertisement
Table of Contents
