Table of Contents
Advertisement
8
Opening the value input screen
9
Setting the upper-limit value
10 Saving the upper-limit value
☆ Key Points of the Procedure ☆
1.
The limit values you have set can be checked each time you press the
The balance displays the lower-limit value after showing [L. SEt], and the upper-limit value after showing [H.
SEt].
Lower-limit value
displayed
2.
If you make a mistake, press the
Set
key during the setup of values.
3.
If you press the
Memory
loaded on the balance. Pressing the
4.
If the [
] mark lights up for all three judgement indicators, HI, OK, and LO, the lower-limit value set exceeds the
upper-limit value. Check the values, since mistakes can occur with entries, as in cases when the upper-limit value
is specified with a negative sign.
5.
When the [M] mark is flashing on the value input screen, the sign on the left end can be changed. Press the
Zero/Tare
key to switch between the positive and negative signs.
30
Upper-limit value
displayed
Function
key during the setup of actual quantities or the
key while a value is flashing, an actual quantity will be set based on the weight currently
Zero/Tare
key at this time displays the value input screen.
Press the
Zero/Tare
key.
Follow the same procedure as in "Step
2."
Follow the same procedure as
described for the lower-limit value and
enter the upper-limit value.
Press the
Memory
key.
After saving the upper-limit value, the
balance displays it briefly and
terminates setup.
Set key.
Measurement mode
restored
Hide quick links:
Advertisement
Table of Contents
