Switching Function For Units Of Measurement; Switching Units Of Measurement; Setup Of Units Of Measurement (Only When The Lock Switch Is Off) - Scale House GAI420 Operation Manual

5. Switching Function for Units of Measurement

Pressing the Function
Up to five different units can be registered for use only when the function key is properly set on a balance for which the
lock switch is off.

5.1 Switching Units of Measurement

Switching the units of measurement to be displayed

5.2 Setup of Units of Measurement (Only when the lock switch is off)

When values [81.S.u.] to [85.S.u.] are entered prior to use, the desired unit of measurement to be displayed can be
chosen simply by pressing the
here, please refer to "4.2 Description of Functions" on page 14.
Example: To change the default factory settings to pound units, use [82.S.u.] in the factory settings.
1 Display the function item [82.S.u. 14]
2 Setting the unit to a pound
key allows the user to switch the unit of measurement to [g], [ct], [%], and so on.
g
%
Pcs
Function key. For more information on the units of measurement that can be set
Press the Function key.
Each press advances through the units
of measurement to be displayed.
※The balance is shipped from the
factory with the following default
setup: [g]  [ct]  [Pcs]  [%]  [g]
 · · ·
Press and hold down the
key.
Release the key as [Func ] appears on
the display.
The function setup mode is now
activated and the first item is displayed.
Press the Function key several more
times, until [82.S.u. 14] appears.
Press the Zero/Tare key several
times to specify [82.S.u. 16].
Function
19