Table of Contents
Advertisement
3
Pressing the [Set] key to restore measurement mode.
4
Pressing the [Function] key to change the units of
measurement
☆ Key Points of the Procedure ☆
1.
When set values are entered in the function items [81.S.u.] to [85.S.u.] prior to use, the desired unit of measurement
to be displayed can be selected simply pressing the
measurement that can be set, please refer to "4.2 Description of Functions," on page 14.
2.
The units are displayed in the same sequence as the settings made from [81.S.u.] to
[85.S.u.].
3.
If [00] is set, no unit of measurement will be displayed, even when units of measurement are set in subsequent
items.
4.
[00] cannot be set in [81.S.u.].
5.
If the same unit of measurement is set multiple times, the second time (and all subsequent times) the unit(s) occurs,
it will be ignored when the display switches.
6.
The units can be set only on a balance for which the lock switch is off. Units cannot be set on a balance with a lock
switch sealed.
7.
When units other than
the power is turned on. ( under the lock switch in on.)
20
g
%
P cs
[g] or [ct] is selected and the power is turned off, [g] is automatically selected the next time
Pressing the
Set
key will reset the
measurement mode
Press the
Function
key.
Each press of the key changes the units
of measurement to be displayed, as
[g] [ lb ] [Pcs] [%] [g]
follows:
· · ·
Function
key. For more information on the units of
Hide quick links:
Advertisement
Table of Contents
