Transmission Service; Transmission Disassembly And Inspection - Polaris RZR 170 2009 Service Manual

CVT / TRANSMISSION

TRANSMISSION SERVICE

Transmission Disassembly and Inspection

IMPORTANT: To ensure proper shifting, verify shift
cables are in good condition, routed properly, and
adjusted properly after transmission is assembled
and engine is installed.
1. Remove drain plug (A) and drain oil from case.
2. Remove shift cable bracket (B) and shift arm screw (C).
3. Mark shift shaft and shift cable arm orientation before
removing the arm.
7.12
A
B
C
4. Remove angle drive inspection / oil fill cover.
NOTE: Angle drive removal is not required for
transmission cover removal or access to internal
transmission components. Drive pinion gear (D) and
shaft will stay with cover when removed.
D
5. Remove (3) angle drive output housing screws. Remove
housing.
6. Note number of shims for assembly.