Advertisement
Troubleshooting
Fault
Electric load does not switch: • Twilight value is set too high
Switches on and off:
Switches on during the day: • Lux value for the brightness threshold is set too high.
Cause/repair
• Check the light's lamp
• Check mains power supply/fuse
• Check coverage area for something causing
the fault: drafts, animals, heating etc.
can all cause an error to occur!
• Check distance to the light
(heat reflections or direct effects of the light)
• Motion detector is too sensitive,
reduce the range using the
sensitivity setting on the controller.
Change lux controller
– 19 –
Advertisement
