Advertisement
Button
Function button
Lock button –
Activates/opens programming mode
The detector can be programmed using the IR remote control. To do so, the
programming mode must first be activated/opened:
When the button
LED flashes briefly (0.2 s). The programming mode of the detector is now
activated (unlocked).
The default setting of the handheld transmitter activates the channel
once the programming mode has been activated.
If the button
will briefly flash three times to indicate that the detector has been locked.
All of the buttons on the remote control are now locked, with exception of:
,
This locked status ensures that no unwanted changes can be made.
The parameters
are then simultaneously transferred to the detector by pressing the button
(group programming).
When the button
tained.
The button
,
by a brief single flash of the LED on the transmitting symbol and the back-
ground LED of the selected parameter.
is pressed, a beep sounds from the buzzer and the
is pressed again, three beeps will sound and the LED
,
,
,
and
,
,
is pressed the previously entered values are re-
enables individual parameters such as
and
to be set. Pressing the button
– 15 –
and
are set using the cursor and
,
,
is acknowledged
Advertisement
