Zublin SG360P Dimm Operating Instructions Manual page 16

Button Function button
Cursor key and button
Settings
Use the cursor to select the required set value in the
lux category and press the button
the detector.
Settings
Use the cursor's pointer to set the time column and
required follow-up time (t) for the LED cursor. By
pressing the button
in the detector.
Settings
Use the cursor's pointer to set the STBY column and
required standby follow-up time (t') for the LED cur-
sor. By pressing the button
is saved in the detector.
Setting
Use the cursor's pointer to set the STBY% column
and the required brightness percentage (%) for the
LED cursor.
By pressing the button
eters are saved in the detector.
Please note: NO = nominal output
to set
(lux value)
(follow-up time t)
, this is then programmed
(standby time t')
, the required time t'
(brightness as a %)
, the required param-
– 16 –
, , and
to submit to
.
= 100 lx
= 300 lx
= 500 lx
= 800 lx
Short pulse 1 s
t = 5 min
t = 10 min
t = 20 min
t' = 1 min
t' = 30 min
t' = 2 h
t' = 8 h
nothing
10 % = NO
20 % = NO
30 % = NO