Advertisement
Manual activation
Automatic dimming and deactivation
If the ambient lighting falls below the preset lux value, the light can be switched on
by briefly pressing the external switch. The light is then automatically adjusted to the
preset lux value.
This will remain the same as long as there are people moving in the coverage area of
the detector. The light automatically switches off again once the preset follow-up time
has lapsed and no more movement can be detected.
Manual deactivation
Once the light has been switched on manually, it can be switched off again using the
external switch or the button
on the remote control. The output remains switched
off until the detector is triggered by a person being present. Once the timer has lapsed
and the person can no longer be detected, the detector switches back to the automatic
operating mode (standby).
– 13 –
Advertisement
