Advertisement
Controller settings
LUX (twilight sensor)
The lux controller can be adjusted from approx. 10 lx (
to 2000 lx (
TIME
The timer can be used to determine how long the light will remain
on following the last movement in the coverage area.
The timer can be adjusted from 10 s to 20 min.
In test mode, the light remains on for 3 s once the detector has
been activated. This is followed by a 6 s pause.
10%
Short pulse function
Test
20 m
If the detector is activated and the ambient light is below the
10 m
preset lux value, a short 1 s pulse is triggered at the output. This
6 m
is followed by a 20 s pause.
0%
SENS (sensitivity/range)
This controller can be used to set the range.
SENS
STBY%
The standby controller comprises four levels: 0%, 10%, 20% or 30%
Pointer position Functions
0 %
10 %
20 %
30 %
).
LUX
10%
10%
20%
10 s
0%
2m
0%
TIME
30%
No standby function
Standby brightness of 10 %
Standby brightness of 20 %
Standby brightness of 30 %
)
LUX
LUX
20%
20%
SENS
SENS
30%
30%
LUX
10%
0%
30%
– 7 –
Test
LUX
20m
10m
6 m
Test
10%
20 m
20%
TIME
10 m
6 m
TIME
0%
30%
SENS
20%
SENS
10%
0%
Test
20 m
10 s
10 m
6m
2m
10 s
SENS
2m
Test
20 m
10 m
6m
TIM
LUX
20%
30%
Advertisement
