Please note: When the, button
is pressed the detector takes on the lux values set
on the controller and the remote control takes on the initial values.
Semi-automatic mode
In semi-automatic mode, the light must always be switched on using the button
on the remote control or via an external switch.
Once switched on, the light remains like this as long as there are people moving in
the coverage area of the detector. The light automatically switches off once the preset
follow-up time has lapsed and no more movement can be detected.
The button
is always active regardless of the mode (lock) of the IR dimming remote
control.
Manual light control
Manual activation and dimming
Automatic deactivation
Once the ambient lighting exceeds the preset lux value, the light can still be switched to
full beam (100%) by briefly pressing the button
or an external switch. The bright-
ness can then be dimmed by pressing and holding the button
.
This function can also be executed using the external switch.
The detector is always retriggered each time a person is detected.
The light automatically switches off once the preset follow-up time has lapsed and no
more movement can be detected.
– 12 –