Advertisement
Dimming function
Automatic dimming function (continuous light controller).
The brightness value is automatically maintained at the preset lux value.
Manual dimming function
The intensity of the light can be adjusted manually using an external button, which must
be pressed and held for more than two seconds. Dimming can be set to: 10% > 50% >
100% > 50% > 10% > 50% etc. When the button is released the current dimming level
is maintained although it is not saved. When the light is switched on again, the original
dimming value is preset.
The light can also be dimmed using the IR remote control. The light output does not need
to be switched on to do so.
The button
must be pressed first before the dimmer can be adjusted with the but-
ton
. Once the required dimming value has been achieved, press the button
again. The dimming process is stopped and the current value is saved as the new preset
lux value. The next time the lighting is switched on, it will automatically be adjusted to
the new preset value (continuous light controller).
If the dimming function is carried out while the light is switched off, the new dimming
value cannot be saved. When the device is then switched back on, the previously saved
lux value will be used.
– 10 –
Advertisement
