Grandstream Networks GXP1610 Administration Manual page 45

Call Waiting Tone Gain
Speaker Ring Volume
Notification tone
volume
Lock Volume
Settings  Web Service
Use Auto Location
Service
Settings  XML Applications
Idle Screen XML
Download
Download Screen XML
At Boot-up
Use Custom Filename
Idle Screen XML Server
Path
Settings  Programmable Keys  Multi-Purpose Keys Settings
Transfer Mode via
MPK
Enable Transfer via
non-Transfer MPK
Settings  Programmable Keys  Programmable Keys
Line Key X
Configures the call waiting tone gain to adjust call waiting tone volume. The
default setting is "Low".
Configures speaker ring volume. The valid range is 0 to 7.
This option allows you to adjust the volume for paging, intercom, auto answer
call and call hold reminder beep. The valid range is 0 to 7.
Locks the volume of the phone's ring tone. When set to "Yes", the volume
buttons on the phone will be disabled during ringing. Default settings is "No".
To enable or disable auto location services on the phone (Reboot required).
Default settings is Yes
Configures to enable idle screen XML download. Users could select
HTTP/HTTPS/TFTP to download the XML idle screen file. Default setting is No.
If set to "Yes", the idle screen XML file will be downloaded when the phone
boots up. The default setting is "No".
Specifies the custom file for the idle screen XML file to be downloaded.
Configures the server path to download the idle screen XML file. This field could
be IP address or URL, with up to 256 characters.
Perform blind transfer, attended transfer, or a new call with the specific in the
Value field when a user presses "Transfer" multiple-purpose key.
MPK with type BLF, Speed dial, etc, will perform as transfer MPK under active
call.
Assigns a function to the corresponding line key. The key mode options are:
•
Line
Regular line key to open up a line and switch line. The Value field can be
left blank.
•
Shared Line
Share line for Shared Line Appearance feature. Select the Account
registered as Shared line for the line key. The Value field can be left blank.
•
Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the
Value field to be dialed.
•
Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active account.
GXP16XX Administration Guide
Version 1.0.4.100
P a g e | 44