Grandstream Networks GXP1610 Administration Manual page 29

Backup Outbound
Proxy
BLF Server
SIP User ID
Authentication ID
Authentication
Password
Name
Voice Mail Access
Number
Account Display
Account x  Network Settings
DNS Mode
Secondary outbound proxy which will be used when the primary proxy cannot
be connected.
The URL or IP address, and port of the BLF Server. When "BLF Server" is
configured, the SUBSCRIBE request will be sent to this address for BLF.
User account information, provided by your VoIP service provider (ITSP). It's
usually in the form of digits similar to phone number or actually a phone number.
SIP service subscriber's Authenticate ID used for authentication. It can be
identical to or different from the SIP User ID.
The account password required for the phone to authenticate with the ITSP
(SIP) server before the account can be registered. After it is saved, this will
appear as hidden for security purpose.
The SIP server subscriber's name (optional) that will be used for Caller ID
display.
This parameter allows you to access voice messages by pressing the
MESSAGE button on the phone. This ID is usually the VM portal access number.
For example, in Asterisk server, 8500 could be used.
This option allows you to configure how your SIP account label will be displayed
on the phone's screen. If set to "User Name", LCD account label will display the
Account Name configured for this SIP account. If set to "User ID", it will then
display the SIP User ID configured for this SIP account.
This parameter controls how the Search Appliance looks up IP addresses for
hostnames. There are four modes: A Record, SRV, NATPTR/SRV, and Use
Configured IP. The default setting is "A Record". If the user wishes to locate the
server by DNS SRV, the user may select "SRV" or "NATPTR/SRV". If "Use
Configured IP" is selected, please fill in the three fields below:
•
Primary IP: Primary IP address where the phone sends DNS query to;
•
Backup IP 1;
•
Backup IP 2.
If SIP server is configured as domain name, phone will not send DNS query, but
use "Primary IP" or "Backup IP x" to send SIP message if at least one of them
are not empty. Phone will try to use "Primary IP" first. After 3 tries without any
response, it will switch to "Backup IP x", and then it will switch back to "Primary
IP" after 3 re-tries. If SIP server is already an IP address, phone will use it directly
even "User Configured IP" is selected.
GXP16XX Administration Guide
Version 1.0.4.100
P a g e | 28