Grandstream Networks GXP1610 Administration Manual page 37

Delayed Call Forward
Wait Time
Enable Local Call
Features
Call Log
Account Ring Tone
Match Incoming
Caller ID
h) <2=011> - replace digit 2 with 011 when dialing
| - the OR operand
i)
•
Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 11 digit numbers with leading digits 1617;
•
Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7 digit
numbers;
•
Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3-digit number, followed by
any number between 2 and 9, followed by any 7-digit number OR Allows any
length of numbers with leading digit 2, replacing the 2 with 011 when dialed.
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
•
^1900x. – prevents dialing any number started with 1900;
•
<=1617>[2-9]xxxxxx – allows dialing to local area code (617) numbers by
dialing7 numbers and 1617 area code will be added automatically;
•
1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11
digits length;
•
011[2-9]x – allows international calls starting with 011;
•
[3469]11 – allows dialing special and emergency numbers 311, 411, 611 and
911.
Note: In some cases, where the user wishes to dial strings such as *123 to
activate voice mail or other applications provided by their service provider, the *
should be predefined inside the dial plan feature. An example dial plan will be:
{ *x+ } which allows the user to dial * followed by any length of numbers. Max
length of dial plan is up to 1024 characters.
Defines the timeout (in seconds) before the call is forwarded on no answer.
Valid range is 1 to 120.
When enabled, call features using star codes will be supported locally.
If set to "No", Call Features and DND options under LCD menu are supported.
And ForwardAll softkey will not be displayed in LCD for Account 1.
The default setting is "Yes".
Configures Call Log setting on the phone. You can log all calls, only log
incoming/outgoing calls or disable call log. The default setting is "Log All Calls".
Configures ring tone for the account.
Specifies matching rules with number, pattern or Alert Info text. When the
incoming caller ID or Alert Info matches the rule, the phone will ring with selected
distinctive ringtone. Matching rules:
•
Specific caller ID number. For example, 8321123;
•
A defined pattern with certain length using x and + to specify, where x could
be any digit from 0 to 9. Samples:
GXP16XX Administration Guide
Version 1.0.4.100
P a g e | 36