Samson 3730-3 Operating Instructions Manual page 117

Code Parameter – Readings/
No. values [default setting]
Codes with marked with an asterisk (*) must be enabled with Code 3 prior to configuration.
48* t2 Final_Position_Value.
Value
t3 Final_Position_Value.
State
t4 AO Feedback Value
t5 AO Feedback State
t6 AO Final_Value.Value Output value [FVR] and its status
t7 AO Final_Value.State
t8 AO Final_Position_
Value.Value
t9 AO Final_Position_
Value.State
Resource Block S
S0 Resource target mode
S1 Resource actual mode Current operating mode
DI1 Function Block I
I0 Target mode DI1
I1 Actual mode DI1
I2 DI1 Trd PV_D.Value
I3 DI1 Trd PV_D.State
I4 DI1 Fb Target Mode
I5 DI1 Fb Actual Mode
I6 DI1 Fb OUT_D.Value
I7 DI1 Fb OUT_D.State
I8 DI1 FSAFE_VAL_D
I9 Simulate
DI2 Function Block L
L0 Target Mode DI2
EB 8389 EN
Description
Current valve position in relation to the working range and its status
Current valve position [OUT_SCALE] and its status
Current valve position [FVR] and its status
Desired operating mode
Desired operating mode
Current operating mode
Discrete input variable and its status
Target operating mode
Current operating mode
Discrete output variable and its status
Default when the sensor registers an error
Simulation
Desired operating mode
1)
1)
1)
1)
1)
Appendix
117