Changing Display Symbols; Navigating In The Menu - ABB REF615 Operation Manual

Section 4
Using HMI locally or via web interface
4.1.8
4.1.9
34
A071010 V2 EN
Figure 12: Changing the LHMI language
To change the language using a shortcut, press
simultaneously.

Changing display symbols

To switch between the display symbols IEC 61850, IEC 60617 and IEC-ANSI:
1. Select Main Menu/Configuration/HMI/FB naming convention and press
.
2.
Change the display symbols with
3.
Press to confirm the selection.
The IED has to be rebooted if the WHMI display symbols are
changed. With the LHMI, the change takes effect immediately.

Navigating in the menu

Navigate the menus and change the display views on the screen with the keypad.
•
To move to the Main Menu or default view, press
•
To move up or down in a menu, press
•
To move downwards in the menu tree, press
•
To move upwards in the menu tree, press
•
To enter setting mode, press
•
To leave setting mode without saving, press
or .
.
or .
.
.
.
.
1MRS756708 A
and
615 series
Operation Manual