Changing Ied Functionality; Defining Setting Group; Activating A Setting Group - ABB REF615 Operation Manual

1MRS756708 A
6.4
6.4.1
6.4.1.1
615 series
Operation Manual
Use the
press clears the indications. The second three-second press clears the
alarm LEDs. If new indications have appeared between the first and
the second press, they are cleared first.

Changing IED functionality

Defining setting group

Activating a setting group

IED settings are planned in advance for different operation conditions by calculating
setting values to different setting groups. The active setting group can be changed by
the IED application or manually from the menu.
1.
Select Main Menu/Settings/Setting group/Active group and press
A071150 V2 EN
Figure 53: Active setting group
2.
Select the setting group with
3.
Press to confirm the selection or
button as a shortcut for clearing. The first three-second
or .
to cancel.
Section 6
Operating procedures
.
75