Ied Parametrization - ABB REF615 Operation Manual

Section 8
Commissioning
8.5.3.2
108
Activating a setting group
IED settings are planned in advance for different operation conditions by calculating
setting values to different setting groups. The active setting group can be changed by
the IED application or manually from the menu.
1.
Select Main Menu/Settings/Setting group/Active group and press
A071150 V2 EN
Figure 72: Active setting group
2.
Select the setting group with
3.
Press to confirm the selection or
A071152 V2 EN
Figure 73: Selecting active setting group
4. Commit the settings.
Remember to document the changes you make.

IED parametrization

IED parameters are set with a parameter setting tool, or via the LHMI or WHMI.
or .
to cancel.
1MRS756708 A
.
615 series
Operation Manual