Editing String Values; Editing Enumerated Values - ABB REF615 Operation Manual

Section 4
Using HMI locally or via web interface
4.1.11.2
4.1.11.3
38
A070756 V2 EN
Figure 17: Arrow symbol is active, the value is set to the maximum
After pressing , the previous value can be restored by pressing
vice versa. Another press of
The symbol in front of the value is ↕, when the previous value is shown.
A070757 V2 EN
Figure 18: Restoring the previous value

Editing string values

1. Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press or to change the value of an active character.
One press changes the value by one step.
3.
Press or to move the cursor to another character.
•
To insert characters or space, press simultaneously
•
To delete characters, press simultaneously

Editing enumerated values

1. Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press or to change the value of an active enumerated value.
or sets the value to the lower or higher limit.
and
1MRS756708 A
once, and
and .
.
615 series
Operation Manual