Advertisement
or it will automatically return to the main functions without any change after idling
30 seconds. Back to the functions without any change press MENU button. The
main functions are shown below:
DMX 512 Address
Select the
, press the ENTER button and the display will blink. Use the DOWN
and UP button to change the DMX 512 address. Once the address has been selected,
press the ENTER button to setup or exit menu mode without any change after 30
seconds automatically. Back to the previous functions without any change press the
MENU button.
Channel Mode
Select the
, press the ENTER button. Use the DOWN and UP button to select
the channel mode (1 /2/8/9). Once selected, press the ENTER button to setup or
7A
exit menu mode without any change after 30 seconds automatically. To go back to
the functions without any change press the MENU button
Manual Mode
Select the
, press the ENTER button. Use the DOWN and UP button to select
ON
/OFF
, after selected, press the ENTER button. If you select the ON,
press the ENTER button, use the DOWN and UP button to select 000-100, and press
the ENTER button to setup or exit menu mode without any change after 30 seconds
automatically. To go back to the functions without any change press the MENU
button
Tungsten Filament Effect
Select the
, press the ENTER button. Use the DOWN and UP button to select
(the effect will display when the light turn off or move) or
won't display when the light turn off or move). Once selected, press the ENTER
button to setup or exit menu mode without any change after 30 seconds
automatically. Back to the functions without any change press the MENU button
again.
LED display
Select the
, press the ENTER button. Use the DOWN and UP button to select
(LED display on) or
(LED display off). If you choose OFF, than the LED
(the effect
8A
Advertisement
