User Settings, Utilities, And Readouts - GLP X4 ATOM series Instruction Manual

6 User settings, utilities, and readouts

The LCD display on the X4 ATOM PSU
provides access to user settings, utilities, and
readouts.
The top line displays the PSU firmware
version, head firmware version, DMX mode,
and dimming mode.
 The DMX mode options are N (normal), W
(white), and C (compressed).
 The dimming mode options are L (linear), S (soft), and E (extra soft).
For example, "V1.00/05/NS" indicates that the PSU is running ver. 1.00 firmware on its
CPU with ver. 05 head firmware. It is set for Normal DMX mode and Soft dimming mode.
Press Mode to enter the menu. Use Up/Down keys to scroll options. Press Enter to get
to the next level or confirm selection. Press Mode to cancel and return to the main menu.
 MODE - ENTER 
DMX Start Address
DMX LED Start Address
Special
Manual DMX
Adjust
1
For service personnel. Contact GLP Service to obtain code.
2
PMW freq. can also be adjusted by DMX.
14
German Light Products GmbH
Master Intensity
Fixture
Zoom
Special
White Temperature
Dimmer
Shutter
White
Blue
Green
Red
Color Wheel
Key code
Display Contrast
PWM Freq. Adj.
Max Zoom adjust
Self Inspection
PSU firmware
Head Firmware
DMX mode
Dimming mode
Remarks
1-511 DMX start address for PSU
1-504 DMX start address for output 1
Output commands without a controller
0-255 Set Master Intensity level
1-12 Select fixture/output to control
0-255 Set zoom level
0-255 Set Special functions
0-255 Set Color temperature level
0-255 Set Dimmer level
0-255 Set Shutter level
0-255 Set White level
0-255 Set Blue level
0-255 Set Green level
0-255 Set Red level
0-255 Set color wheel level
xxxx Enter code to unlock Adjust menu
-8 to 8 Adjustment for the Display contrast
582-618 Adjust PMW frequency
-99 to 99 Calibration of Zoom-offset
Runs a self-diagnostic test and checks
-
head firmware
WWW.GLP.DE
V1.00/ 05/N S
1
2
X4 Atom User Manual (v.0.1)