Adjustments And Calibrations; Default Settings (Dfse) - GLP YPOC 250 Color Instruction Manual

3.10.8 Adjustments and Calibrations

ADJU
By this function you can adjust and calibrate the positions of the different
wheels and other motors. This can be necessary after a service or repair
work.
For this function you have to entry the fixture code. This work should be
done only by authorized persons.
Use the Up/Down-keys to select desired function and press Enter to
confirm or Mode to cancel and return to the menu. Use now the Up/Down-
keys to set the adjustment values and confirm once more with the Enter-
key or cancel with the Mode-key.
Function
COLO
BSPR
CLRE
FACC
ARES
3.10.9 Default Settings
DFSE
Press Enter to reset all fixture personalities (not the adjusted functions) to
the default values. On the display will appear
defaults are set.
Function
DMX Address
Pan reverse
Tilt reverse
Automatic lamp on
Lamp on via DMX
Display
Cooling fan
Feedback
GLP German Light Production
(ADJU)
Value
- 99 - + 99
- 99 - + 99
Adjustments in the internal circuit.
ON
Must read
Adjust- Reset
(DFSE)
Display
D001
RPAN
RTLT
LAAU
DLOF
DISP
FANS
FEED
(V1.42)
Remark
Color wheel
Beamshape
For authorized
persons only
Service manual
ok
to indicate that the
Default Settings
D001
ON
ON
ON
ON
D ON
REG
HIGH LOOF
ON
OFF
OFF
OFF
OFF
LOHI
OFF
16