GLP X4 ATOM series Instruction Manual page 10

Mounting in a multiple array or matrix setup
Multiple X4 ATOM heads can easily be physically joined using the ATOM connector
included with each head to create columns, matrixes, and other configurations,
particularly when combined with the X4 ATOM Trussbar and rigging accessories. See
page 13 for more information.
To start connecting heads, attach the connector to the first head by sliding it forward
onto a connector socket from the back of the head. Then slide the connector socket of
the second head backwards onto the other side of the connector. Verify that each head
is securely locked to the connector.
ATOM Connector
(GLP #767004)
To remove an ATOM connector from a socket, press the pin to unlock. Slide the
connector backwards off of the socket.
Up to twelve X4 ATOM heads can be connected vertically in a single column. Do not
hang more than 1 X4 ATOM horizontally to either side of the suspended head. Secure
each head with a separate safety cable.
10
German Light Products GmbH
Do not hang more than 12 X4 ATOM heads from a single point.
Do not connect more than 1 X4 ATOM head to either side of the
suspended head.
Secure each X4 ATOM head with its own safety cable.
WWW.GLP.DE
X4 Atom User Manual (v.0.1)