GLP X4 ATOM series Instruction Manual page 7

4. The PSU and lighting head contain no user-serviceable parts. Opening the PSU or
lighting head will void all warranties.
5. Wait at least 15 minutes after turning the system off to handle lighting heads. Handle
carefully and be aware that some surfaces may be extremely hot.
6. Install X4 ATOM system components as directed below with suitable clamps and
other hardware including safety cables. Avoid placing lighting heads in locations
where there is risk of accidental contact.
7. Repair, maintenance and installation work shall be performed only by GLP- certified
technicians or other qualified lighting professionals. These operations require
common trade knowledge that is not explicitly provided in this manual.
8. Use only original spare parts. Any structural modification on the system will
terminate all warranty claims.
9. Keep this user manual for future reference.
Should you have any questions about the safe operation of your X4 ATOM, please
contact your local GLP office, or their authorized distributor, a list of which can be found
at www.glp.de.
X4 Atom User Manual (v.0.3)
German Light Products GmbH WWW.GLP.DE
7