16.2.7
Driving functions overview
⑤
②
①
④
Fig. 77: Driving functions
Fig. 78: Driving function blocked
104
Overview of the driving functions shown on the display of the control pa-
nel during driving, steering and braking actions of the power wheelchair.
›
Selected drive program/movement level ①
›
Maximum speed in the selected drive program ②
Key ③ to switch to a higher (+) or lower (-) drive program
›
›
Key ④ to change speed in the drive program
Display showing "trip" in kilometres and current speed (km/h) ⑤
③
›
Display is blank when a charging device is connected.
›
If the wheelchair is switched on, the charging status indicator is the
only thing shown.
›
First connect the charging lead for the charging device at the joystick,
then plug the power cable for the charging device into the socket.
L
L
If the power wheelchair is being charged via the charging socket
on the control panel, driving mode is automatically blocked.
Controls