16.1.7
Driving functions overview
⑤
②
①
Fig. 55: Driving functions
Fig. 56: Charging status indicator (driving
function blocked)
92
Overview of the driving functions shown on the display of the control pa-
nel during driving, steering and braking actions of the power wheelchair.
›
Selected drive program/movement level ①
⑥
›
Respective setting (having drilled down) for the selected movement
level (1 to 5)Maximum speed in the selected drive program ②
Key ③ (Profile) to switch to a higher or lower drive program (1 to 5)
›
③
›
Key ④ to change speed in the drive program
④
›
Display of the current speed (km/h) ⑤
"Trip" display in kilometres ⑥
›
Display turns black when a charging device is connected.
›
If the wheelchair is switched on, the charging status indicator is the
only thing shown.
›
First connect the charging lead for the charging device at the joystick,
then plug the power cable for the charging device into the socket.
L
L
If the power wheelchair is being charged via the charging socket
on the control panel, driving mode is automatically blocked.
Controls