10.8.3
Setting the foot rest angle
The angle of the foot rests can be set separately for each foot rest to
match your individual needs.
The following settings are available:
›
Screw the adjustment screw inwards -> the foot rest is lowered.
›
Screw the adjustment screw outwards -> the foot rest is raised.
L
L
Do not force the adjustment screw in or out. Raise the foot
rest a little to remove pressure on the adjustment screw.
Take the following steps in the following sequence when setting the
angle of the foot rest:
›
Raise the foot rest .
›
Loosen the lock nut .
›
Screw the adjustment screw in or out as required.
›
Check your setting (lower the foot rest).
›
Tighten the lock nut to about 8 Nm.
62
Fig. 25: Foot rest angle
Use of the special orthopaedic seat