Paravan PR 50 User Manual page 120

Error Message
Brake Error
Gone to sleep
120
Meaning
Error with the brakes This message appears when the control system detects a prob-
lem with the magnetic brakes or their connections.
Check the magnetic brakes, cables and connections in the control system. Check that
the motor brakes have not come uncoupled. Motor error This message appears when
the control system detects that the connection to a motor has been interrupted. Check
the motors, cables and connections in the control system.
This message appears when the control system has been inactive for longer than the
[time] period defined by the "SleepTimer" parameter. Gyro disconnected
This message appears when the control system detects that the gyro module is no
longer connected. Reconnect the gyro module and restart the system. Bad cable This
message appears when the control system detects an error in the cabling that allows
the modules to communicate with each other. Check whether the cables or connec-
tions have been interrupted or squashed/jammed. If there is any visible damage to the
cables, replace them and switch the control system off and on again. Please speak to
customer services about getting a replacement.
Correcting failures