Table of Contents
Advertisement
10.8
The foot support unit
Using the electric wheelchair's electrical angle and length compensati-
on system, you can adjust the foot support unit electrically in terms of
its length and its angle in relation to the seat. The angle of the foot rest
can only be adjusted manually using an adjustment screw.
10.8.1
Setting the lower leg length
The projection and length of the lower leg can be set electrically using
the PARAVAN control's length setting.
›
Select the menu in the control.
›
Make your setting.
)
)
See Section "16 Controls"
L
L
If this adjustment mode is not sufficient for your needs, then
the foot support must be mechanically adjusted at the foot
support !
60
Fig. 23: Lower leg length
Settings on your electric wheelchair; mechanical
Advertisement
Table of Contents
