Table of Contents
Advertisement
Overview
You can operate the VS481C using the panel pushbuttons, the IR remote
control unit, or an RS-232 serial controller. The availability of actions with the
three methods is summarized in the table below.
Action
Switch the port
Switch the display to a specific
source
Switch to the next available port
Switch to the previous available
port
Set the switch mode
Enable the off mode
Enable the next mode (default)
Enable the priority mode
Enable/disable the POD mode
Other settings
Enable/disable the standby mode
Read (display) the device settings
Operation Methods
Panel
IR Remote
Pushbuttons
Control Unit
Chapter 3
Operation
Serial Controller
11
Advertisement
Table of Contents
