Planning The Installation; Required Equipment; Optional Equipment; Compatible Aten Products - ATEN VS481C User Manual

Planning the Installation

Required Equipment

1 - 4 source devices equipped with an HDMI Type-A connector
1 display device equipped with an HDMI Type-A connector
1 - 5 HDMI cables
Note: ATEN recommends using the High Speed HDMI Cable (2L-7D02H-1) or
the equivalent for best results.

Optional Equipment

Purpose
To control the VS481C
using serial commands
To extend the reception
range for the IR remote
control unit

Compatible ATEN Products

The VS481C is compatible with the following ATEN products:
Product Type
ATEN Video Extender
ATEN Video Switch
Others
Note: For an up-to-date list of compatible ATEN products, go to the VS481C
product web page at
1 Hardware Controller
1 Serial Cable with a 9-pin male connector
1 ATEN IR Receiver Cable (ATEN 2XRT-
0003G IR Receiver) or IR Remote Control
(ATEN 2XRT-0101G)
VE811T, VE811R, VE8900T, VE8900R, VE8950T,
VE8950R
VS0801HB
VanCryst HDMI cables
http://www.aten.com/global/en/
VS481C User Manual
Equipment
Models
3