Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ATEN VS-291
Summary of Contents for ATEN VS-291
- Page 1 2/4-Port Video Switch USER MANUAL VS-291 / VS-491...
-
Page 2: Fcc Information
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. -
Page 3: Online Registration
You can register your product at our online support center: International – http://support.aten.com North America – http://www.aten-usa.com/ product_registration Online Support Online technical support is available to ATEN customers through our support center: International – http://support.aten.com North America – http://www.aten-usa.com/support. Troubleshooting, Documentation (including online manuals),... -
Page 4: Package Contents
Copyright © 2007 ATEN International Co., Ltd. Manual Part No. PAPE-1181-200G Printing Date: 09/2007 ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. - 4 -... - Page 5 Overview The VS-291 / VS-491 Video Switches are control units that allow you to conveniently display the video output of two (VS-291) or four (VS-491) separate computer systems on a single monitor, thereby eliminating the unnecessary expense of purchasing a separate monitor for each computer.
- Page 6 Features Electronic switching for greater reliability and durability Display the output of two (VS-291) or four (VS-491) computers on a single monitor High resolution video – Up to 1920 x 1440; DDC; DDC2; DDC2B Supports, VGA, SVGA, XGA and Multisync Monitors Easy installation –...
-
Page 7: System Requirements
System Requirements Monitors One VGA, SVGA, XGA, or Multisync compatible analog monitor, with a standard PC high-density cable with a standard HDB-15 male connector Computers The following equipment must be installed on each computer that is to be connected to the system: One VGA, SVGA, XGA, or Multisync analog video card with a standard HDB-15 female connector per computer Cables... - Page 8 A LED lights to indicate that its corresponding port is the one that has the video focus. Note: The VS-291 Front View is similar to the VS-491, except that it only has two Selected Port LEDs. - 8 -...
- Page 9 The video cables that connect to the computer video ports plug in here. Power Jack The Power Adapter cable plugs in here. Note: The VS-291 Rear View is similar to the VS-491, except it has only two Video Ports. - 9 -...
-
Page 10: Installation
Installation Make sure that all devices you will be installing are properly grounded. Installation is simply a matter of plugging in cables. Refer to the diagrams as you follow the step-by-step directions below: 1. Plug the monitor cable into the unit's monitor port. 2. -
Page 11: Specifications
Specifications Function VS-291 VS-491 Connectors Output 1 x HDB-15 Female Input 2 x HDB-15 Female 4 x HDB-15 Female Power 1 x Power Jack LEDs (Selected Ports) Port Selection 1 x Pushbutton Video 1920 x 1440 @ 60Hz; DDC; DDC2; DDC2B... -
Page 12: Limited Warranty
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and specially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Need help?
Do you have a question about the VS-291 and is the answer not in the manual?
Questions and answers