ATEN VS481C User Manual page 23

RS-232 Commands
Task
Switch the source
Switch the display to a
specific source
Turn on the output port
Turn off the output port
Change the switch mode
Enable the next mode
(Default)
Enable the priority mode
Disable the switch mode
Enable the POD mode
Disable the POD mode
Other
Read (display) the
VS481C's settings
Note: Separate each command string with a space.
RS-232 Command
sw i<source_number>
sw on
sw off
swmode next
swmode i<source_number>
priority
swmode off
swmode pod on
swmode pod off
read
VS481C User Manual
Description
For example, to switch to source 1, type
sw i01 or sw
-
-
The VS481C switches to the next port
that has a new source device connected
to it.
The VS481C switches to and only
displays the source from a user-defined
port as soon as a source is detected
from the port. For example, to prioritize
port 1, type swmode i01 priority or
swmode priority
Disable the switch mode and the
VS481C does not switch ports
automatically.
The Power-on Detection (POD) mode
allows the VS481C to automatically
switch to the next port with a powered-
on source device when the currently
connected source device is powered off.
The POD mode works independently of
the other switch modes.
-
15