EMC Information Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
UH3231 User Manual Online Registration http://eservice.aten.com International Telephone Support International 886-2-8692-6959 China 86-400-810-0-810 Japan 81-3-5615-5811 Korea 82-2-467-6789 North America 1-888-999-ATEN ext 4988 United Kingdom 44-8-4481-58923 Technical Support For international online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten.com...
Page 5
HDMI, DVI or VGA outputs for use in dual display mode. The UH3231 can route video from the source device to two DisplayPort monitors, splitting the video transmission for a dual- view display via a single cable while maintaining a high quality resolution up to 1080p.
Page 6
Features Connects a computer to two DisplayPort monitors with Dual-View output USB 3.1 Gen 1 compliant Supports 4K (UHD) resolutions via single display output Supports dual-display video output up to 1920 x 1080 simultaneously* USB 3.1 Gen 1 port with data transfer rates up to 5 Gbps Supports variety of video converters via DisplayPort Dual-Mode standard Plug and Play –...
System Requirements Hardware USB Type-C or Thunderbolt™ 3 USB Type-C compatible computer* Two DisplayPort™ v1.2a / v1.1a monitors A USB Keyboard, Mouse or other USB peripheral device Note: 1. For video output to work through a USB-C port, it must support DP Alt Mode.
Page 8
Component Description Power / Status This LED lights Blue to indicate the UH3231 is powered on, or Orange to indicate that the UH3231 isn’t receiving sufficient power from the computer to supply power to the device connected to the USB 3.0 port.
2. Make sure that all devices you will be installing are properly grounded. To setup the UH3231, use the diagram on the next page (the numbers in the diagram correspond with the numbered instructions below), and do the following: 1.
DisplayPort 1920 x 1200 @ 60 Hz View DisplayPort 1920 x 1200 @ 60 Hz DP++ *The UH3231 supports DP++ standard for using optional active/ passive video adapters to convert DP signals to DVI/HDMI. Power Consumption DC 5 V, 15 W...
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and specially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Need help?
Do you have a question about the UH3231 and is the answer not in the manual?
Questions and answers