Nimbus Water Systems WaterMaker Five WM5-50 Instruction page 3

Congratulati ons on your purchase of the WaterMaker Five reverse osmosis system.
The WaterMaker Five features a four-stage prefi lter, membrane and postf ilter
housed in a single cartridge. The fi ft h stage, an in-line carbon fi lter, is placed
between tank and faucet.
When properly maintained, this system will provide you with years of trouble-
free service. The next secti ons contain important informati on on the proper care
and maintenance of your system, please take a few minutes to read through this
informati on.
The cartridges in this system must be replaced on a regular basis to maintain
effi ciency and to ensure high water quality. These cartridges work together and
must be replaced every 6-12 months. Any signifi cant change in performance of
the system should be investi gated promptly to avoid secondary damage or
deteriorati on to other parts of the system.
CAUTION: Improperly installed systems could result in water damage due to
leaks or fl ooding. Proper installati on of this system requires familiarity with
standard sink plumbing and proper use of common hand and power tools. If you
are not familiar with standard sink plumbing and proper use of common hand
and power tools or have any diffi culty with the installati on of this system, consult
a licensed professional, such as a contractor or plumber.
NOTE: This system has been designed for installati on by licensed professionals,
such as a contractor or plumber.
Stage
4-Stage Cartridge
1) 20 micron sediment prefi lter
1-4 2) Granular acti vated carbon prefi lter
3) Reverse osmosis membrane
4) Granular acti vated carbon postf ilter
Granular acti vated carbon postf ilter
5
(inline between tank and faucet)
Introducti on to the WaterMaker Five
Descripti on
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343 · www.nimbuswater.com
Replacement Part
Interval Number
12 months 104592
6-12 months 104803
The WaterMaker Five uses
the latest in system design
and membrane technology to
reduce the amount of water
down the drain by 50%.
The WaterMaker Five is
smaller and uses signifi cantly
fewer resources in the
manufacturing process than
the typical 5-stage RO system.
Smaller packaging and a
lighter shipping weight further
reduce impact on the
environment.
3