Panasonic SF4B-H12C Instruction Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security System
  5. SF4B-H12C
  6. Instruction manual

Panasonic SF4B-H12C Instruction Manual

Compact light curtain / type 4. sf4b series
Hide thumbs
Table of Contents

Advertisement

Quick Links

WUME-SF4BC-5
2014.6
panasonic.net/id/pidsx/global
Ramco National
Compact Light Curtain / Type 4
SF4B-□C□
Instruction Manual
800-280-6933 | nsales@ramcoi.com
www.panasonicsensors.com

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SF4B-H12C

Summary of Contents for Panasonic SF4B-H12C

  • Page 1 Compact Light Curtain / Type 4 SF4B-□C□ Instruction Manual WUME-SF4BC-5 2014.6 panasonic.net/id/pidsx/global Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 2 (MEMO) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 3 3) Though we have carefully drawn up the contents of this instruction manual, if there are any as- pects that are not clear, or any error that you may notice, please contact our local Panasonic Industrial Devices SUNX office of the nearest distributor.

  • Page 4: Table Of Contents

    3-8 Functions Using Handy Controller (SFB-HC) (Optional) ······················ Chapter 4 Maintenance ····································································· 4-1 Daily Inspection ·········································································· 4-2 Periodic Inspection (Every Six Months) ············································ 4-3 Inspection after Maintenance ························································· © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 5 MS-SF4BC-7 ································································ 6-3-9 Mounting with MS-SF4BCH-□ and MS-SF4BC-1 ························ 6-3-10 Mounting Brackets ······························································ Chapter 7 Others ··········································································· 7-1 Glossary ················································································· 7-2 CE Marking Declaration of Conformity ··········································· © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 6: Chapter 1 Introduction

    ■ Before using this device, check whether the device performs properly with the functions and capabilities as per the design specifications. ■ In case of disposal, dispose this device as an industrial waste. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 7 ● Do not use this device in a reflective configuration. ● The corresponding emitter and receiver must have the same serial No. and be correctly oriented. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 8 ● Do not use this device to detect objects flying over the sensing area. ● Do not use this device to detect transparent objects, translucent objects or objects smaller than the specifi ed minimum sensing objects. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 9: Applicable Standards / Regulations

    ● When this device is used in a place other than the places shown above, be sure to confirm the standards or regulations applicable in each region or country before use. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 10: Confirmation Of Packed Contents

    1 pc. each □ Test Rod 1 pc. SF4B-H□C, SF4B-H□CA-J05: SF4B-TR25 (ø25 × 220mm) □ Quick Instruction Manual (Japanese, English, Chinese, Korean) 1 pc. each language © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 11: Chapter 2 Before Using This Device

    Standard mounting bracket (only SF4B-□CA-J05) MS-SF4BC-1 (Optional) Beam channel Emitter Display section Large multi-purpose indicator (only SF4B-□CA-J05) Gray cable with black line Display section Gray cable © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 12 NPN indicator [NPN] NPN indicator [NPN] Emission intensity Function setting indicator control indicator [CTRL] [FUNCTION] Display section Emission halt indicator Interlock indicator [HALT] [INTERLOCK] Bottom end © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 13 3) The blanking function is set by using the handy controller (SFB-HC) (optional). Please purchase the handy controller separately. 4) The description given in [ ] is marked on the device. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 14: Protection Area

    <Example of Correct Installation> Protective structure Sensing area Dangerous part Dangerous part Sensing area <Example of Incorrect Installation> Sensing Sensing Dangerous Dangerous area area part part © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 15: Safety Distance

    The safety distance is calculated based on the equation described in the next page when a per- son moves perpendicular (normal intrusion) to the sensing area of the device. Safety distance S Sensing area Dangerous part Intrusion direction © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 16 : Response time of this device (sec.) SF4B : Additional distance calculated from the size of the minimum sensing object of the device (mm) C = 850 (mm) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 17 + 110.4 S = 1,600 × T = 1,600 × 0.4 + 110.4 = 750.4 Since this value matches with Case 5) above, S is 750.4 (mm) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 18 ● Since the calculation above is performed by taking 1 (inch) = 25.4 (mm), there is a slight differ- ence between the representation in (mm) and that in (inch). Refer to the relevant standard for the details. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 19: Influence Of Reflective Surfaces

    ±3° to take care of beam misalignment, etc. during installation. Allowable Distance from This Device to Reflective Surface Install in this area Do not install in this area Distance between emitter and receiver © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 20: Device Placement

    Emitter Emitter Emitter Barrier Receiver <Reference> The above figures are just examples of device placement. If there are any questions or problems, please contact our office. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 21 WARNING Position the emitter and receiver so that their cables are aligned. Failure to do so will cause the system to malfunction. Cable Cable Cable Cable © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 22: Mounting

    ● Unless otherwise specified, the following mounting procedure is common for both emitter and receiver. For the preparation of the mounting, prepare the mounting holes on the mounting sur- face by referring to “6-3 Dimensions.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 23 [M5 (purchase separately)] Hexagon-socket head bolt [M5 (purchase separately)] Main body Main body Note: Use M5 washers (accessory of MS-SF4BC-1) when mounting to an aluminum frame. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 24 MS-SF4BC-5 (optional). SF4B-H40C□, SF4B-H48C□, SF4B-H56C□, SF4B-A20C□, SF4B-A24C□, SF4B-A28C□: 1 set SF4B-H64C□, SF4B-H72C□, SF4B-H80C□, SF4B-H88C□, SF4B-H96C□, SF4B-A32C□, SF4B-A36C□, SF4B-A40C□, SF4B-A44C□, SF4B-A48C□: 2 sets © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 25 Hexagon head bolt Hexagon-socket head bolt [M5 (purchase separately)] Main body Main body Note: Use M5 washers (accessory of MS-SF4BC-2) when mounting to an aluminum frame. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 26 Hexagon head bolt Hexagon-socket head bolt [M5 (purchase separately)] Main body Main body Note: Use M5 washers (accessory of MS-SF4BC-3) when mounting to an aluminum frame. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 27 Step 2 Insert bracket A from the rear of the device. Bracket A Main body Step 3 Insert bracket B into the gap between the device and bracket A. Bracket A Bracket B Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 28 MS-SF4BC-4 (optional). SF4B-H40C□, SF4B-H48C□, SF4B-H56C□, SF4B-A20C□, SF4B-A24C□, SF4B-A28C□: 1 set SF4B-H64C□, SF4B-H72C□, SF4B-H80C□, SF4B-H88C□, SF4B-H96C□, SF4B-A32C□, SF4B-A36C□, SF4B-A40C□, SF4B-A44C□, SF4B-A48C□: 2 sets © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 29 2) When mounting a side mounting bracket MS-SF4BC-6 (optional) to an aluminum frame, etc., pay atten- tion to the mounting direction. Aluminum frame, etc. Projection Projection Aluminum frame, etc. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 30 Side mounting bracket MS-SF4BC-6 (Optional) Main body Aluminum frame ● When mounting to elsewhere, refer to the following figure for installation. Side mounting bracket MS-SF4BC-6 (Optional) (24mm) Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 31 Bracket B Main body Step 4 Match the hole in bracket C with the hole in bracket B. Bracket A Bracket B Bracket C Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 32 MS-SF4BC-7 (optional). SF4B-H40C□, SF4B-H48C□, SF4B-H56C□, SF4B-A20C□, SF4B-A24C□, SF4B-A28C□: 1 set SF4B-H64C□, SF4B-H72C□, SF4B-H80C□, SF4B-H88C□, SF4B-H96C□, SF4B-A32C□, SF4B-A36C□, SF4B-A40C□, SF4B-A44C□, SF4B-A48C□: 2 sets © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 33 ● When mounting to elsewhere, refer to the following figure for installation. Intermediate supporting bracket for use with side mounting bracket MS-SF4BC-7 (Optional) Main body (24mm) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 34 [M3 (length: 5 mm)]. The tightening torque should be 0.5N•m. Hexagon-socket head bolts [M3 (length: 5mm)] (Accessory of MS-SF4BC-1) Standard mounting bracket MS-SF4BC-1 (Optional) Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 35 Notes: 1) Use M5 washers (accessory of MS-SF4BC-1) when mounting to an aluminum frame. 2) Be careful to prevent the machine from slipping out of the protective metal case while assembling it to the mounting face. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 36: Wiring

    6) In case a surge is generated, take countermeasures such as connecting a surge ab- sorber to the origin of the surge. 7) Power supply unit corresponding to CLASS 2 (only for requiring cTUVus Mark conformation). © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 37: I/O Circuit Diagrams And Output Waveform

    Note: Vs is the applying supply voltage. <Reference> ● K1, K2: External device (Forced guided relay or magnetic contactor) ● For more information about wiring, refer to Section 2-5-4 and subsequent sections. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 38 0 to + 1.5V (source current: 5mA or less): Valid, Open: Invalid <Reference> ● K1, K2: External device (Forced guided relay or magnetic contactor) ● For more information about wiring, refer to Section 2-5-4 and subsequent sections. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 39 (Gray / Black) Large multi-purpose indicator input (Receiver side) (Black) Control output 1 (OSSD 1) (White) Control output 2 (OSSD 2) (Shield) Output polarity setting wire (Blue) 0V Internal circuit Users’ circuit © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 40 Note: Vs is the applying supply voltage. <Reference> ● K1, K2: External device (Forced guided relay or magnetic contactor) ● For more information about wiring, refer to Section 2-5-4 and subsequent sections. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 41 (Yellow-green) External device monitor input 0.047μF 1kΩ (Sky-blue / White) Muting input A 0.047μF (Sky-blue / Black) Muting input B 1kΩ (Blue) 0V Internal circuit Users’ circuit © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 42 0 to + 1.5V (source current: 5mA or less): Lights up, Open: Turn OFF <Reference> ● K1, K2: External device (Forced guided relay or magnetic contactor) ● For more information about wiring, refer to Section 2-5-4 and subsequent sections. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 43: Wiring · Connecting Procedure And Connector Pin Arrangement

    ● When the synchronization + wire (orange) and synchronization - wire (orange / black) is extend- ed with a cable other than exclusive cable, use a 0.2mm or more shielded twisted pair cable. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 44 Connector for emitter: gray, connector for receiver: black ● For details of the cable with connector on one end, and the cable with connector on both ends, refer to “6-2 Options.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 45: Basic Wiring

    (White) Control output 2 (OSSD 2) (Shield) Output polarity setting wire (Blue) 0V Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 46 (White) Control output 2 (OSSD 2) (Shield) Output polarity setting wire (Blue) 0V Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 47 (Sky-blue / Black) Muting input B (Gray / Black) Large multi-purpose indicator input (Receiver side) (Gray) NC Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 48 (Sky-blue / Black) Muting input B (Gray / Black) Large multi-purpose indicator input (Receiver side) (Gray) NC Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 49: Wiring For Manual Reset (Interlock Is Valid)

    K1, K2: External device (Forced guided relay or magnetic contactor) Notes: 1) Vs is the applying supply voltage. 2) For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 50 0 to +1.5V (source current 5mA or less): Emission halt, Open: Emission K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 51 K1, K2: External device (Forced guided relay or magnetic contactor) Notes: 1) Vs is the applying supply voltage. 2) For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 52 0 to +1.5V (source current 5mA or less): Emission halt, Open: Emission K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 53: Wiring For Auto-Reset (Interlock Is Invalid)

    K1, K2: External device (Forced guided relay or magnetic contactor) Notes: 1) Vs is the applying supply voltage. 2) For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 54 0 to +1.5V (source current 5mA or less): Emission, Open: Emission halt K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 55 K1, K2: External device (Forced guided relay or magnetic contactor) Notes: 1) Vs is the applying supply voltage. 2) For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 56 0 to +1.5V (source current 5mA or less): Emission, Open: Emission halt K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “3-2 Interlock Function.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 57: Wiring Configuration For Invalid External Device Monitor Function

    Vs to Vs - 2.5V (sink current 5mA or less): Emission (Note), Open: Emission halt K1, K2: Safety relay unit etc. Note: Vs is the applying supply voltage. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 58 (shield). Incorrect wiring may cause the lockout state. * Symbols Switch S1 0 to +1.5V (source current 5mA or less): Emission, Open: Emission halt K1, K2: Safety relay unit etc. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 59 Vs to Vs - 2.5V (sink current 5mA or less): Emission (Note), Open: Emission halt K1, K2: Safety relay unit etc. Note: Vs is the applying supply voltage. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 60 (shield). Incorrect wiring may cause the lockout state. * Symbols Switch S1 0 to +1.5V (source current 5mA or less): Emission, Open: Emission halt K1, K2: Safety relay unit etc. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 61: Wiring Configuration For Valid Muting Function (For Sf4B-□Ca-J05 Only)

    Vs to Vs - 2.5V (sink current 5mA or less): Valid (Note), Open: Invalid K1, K2: External device (Forced guided relay or magnetic contactor) Note: Vs is the applying supply voltage. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 62 ● Muting input A / B, Override input 0 to + 1.5V (source current: 5mA or less): Valid, Open: Invalid K1, K2: External device (Forced guided relay or magnetic contactor) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 63: Adjustment

    MS-SF4BC-7 (Optional) Utility mounting bracket (Optional) MS-SF4BC-2 (for rear) Hexagon socket head bolt MS-SF4BC-3 (for side) [M3 (length: 6mm)] Side mounting bracket (Optional) MS-SF4BC-6 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 64 After the beam-axis alignment is finished, make sure to confirm that all the bolts are tightened by the specified torque. For the tightening torque of each bolt, refer to “2-4 Mounting.” © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 65: Operation Test

    If the indicators show reception of the light even though the test rod blocks the light, check wheth- er there is any reflective object or extraneous light source near this device or not. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 66: Operation

    2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- ting mode. In case of NPN output setting mode, the NPN indicator (orange) lights up. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 67 2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- ting mode. In case of NPN output setting mode, the NPN indicator (orange) lights up. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 68 2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- ting mode. In case of NPN output setting mode, the NPN indicator (orange) lights up. 3) Vs is the applying supply voltage. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 69 2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- ting mode. In case of NPN output setting mode, the NPN indicator (orange) lights up. 3) Vs is the applying supply voltage. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 70 OFF and ON again. (Source of error): The control output (OSSD) short-circuit, extraneous light detection, sensor failure, etc. Refer to “Chapter 5 Troubleshooting” and remove the source of error. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 71: Chapter 3 Functions

    The control output (OSSD 1 / 2) is turned ON automatically when this device receives the light. <Reference> It is possible to change the conditions for interlocking by using the handy controller (SFB-HC) (optional). © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 72: Emission Halt Function

    Do not use the emission halt function for the purpose of stopping the machine in which the SF4B-□C□ is installed. Failure to do so could result in death or serious injury. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 73: Auxiliary Output (Non-Safety Output)

    The auxiliary output cannot be connected to external devices. <Reference> It is also possible to set the external device monitor function into ‘invalid’ by using the handy con- troller (SFB-HC) (optional). © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 74 <Timing chart (Error 2)> 90ms or less Light Light received received status Light blocked Control output (OSSD 1 / 2) 300ms External device monitor input Lockout state © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 75: Muting Function (For Sf4B-□Ca-J05 Only)

    2) The muting indicator diagnosis function can be set with the handy controller Ver. 2 or later (SFB-HC) (optional), but it must be set to invalid. If the muting indicator diagnosis function is set to valid, the mut- ing function cannot be used. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 76 Muting input A Muting input B <For NPN output> Muting sensor A Muting sensor C Muting sensor B Muting sensor D Muting input A Muting input B © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 77 (Orange / Black) Synchronization - (Orange) Synchronization + (Brown) +V Gray cable (Blue) 0V with black line (Gray / Black) Large multi-purpose indicator input (Receiver side) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 78: Override Function (For Sf4B-□Ca-J05 Only)

    If the muting indicator diagnosis function is set to valid, the muting function cannot be used. 3) The override function operates only when the auto-reset is ON (the interlock is invalid). © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 79 When the muting indicator diagnosis function is invalid, the muting function becomes valid 3 sec. after the input conditions of the muting sensor A (C) and B (D) were satisfied. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 80: Functions Using Handy Controller (Sfb-Hc) (Optional)

    If the auxiliary output switching function activates in No. 8 output, this device becomes OFF because the sensor itself detects the object. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 81 To make the muting function valid, time difference between the time during muting input A becomes ON from OFF (Open) and the time during muting input B becomes OFF (Open) from ON should be within 3 sec. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 82 Unless the password is inputted, any change in setting of the device is not allowed. The factory setting is set to be invalid for the protective function. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 83: Chapter 4 Maintenance

    Be sure to check the operation of the muting function before its use. Furthermore, check the state □ of the muting indicator (cleanliness or brightness, etc.) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 84: Periodic Inspection (Every Six Months)

    5) When the wiring method or wiring layout is changed. 6) When FSD (Final Switching Device) parts are replaced. 7) When FSD (Final Switching Device) setting is changed. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 85: Panasonic Industrial Devices Sunx Co., Ltd

    If this device still does not work, confirm number of blinks of the error indicator and call to our local office. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...
  • Page 86 Note: Since the color of the operation indicator changes according to ON / OFF status of the control output (OSSD 1 / 2), the operation indicator is marked as “OSSD” on the device. If the device does not work normally after checking the items above, please consult Panasonic Industrial Devices SUNX.

  • Page 87: Troubleshooting Of Receiver

    Output polarity setting wire Output polarity setting wire Wire the output polarity setting wire (shield) of the (shield) error receiver correctly. (shield) connection of emitter / receiver is incorrect. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 88 Synchronization + wire (orange) or synchronization - wire Refer to “2-5 Wiring.” (orange / black) comes down or short-circuits. If the device does not work normally after checking the items above, please consult Panasonic Industrial Devices SUNX. <Reference> About counting blinks of the error indicator, count blinks from 2 seconds of no blinking.

  • Page 89: Chapter 6 Specifications / Dimensions

    <Beam pitch> H: 20mm, A: 40mm Example: SF4B-H32CA-J05 Number of beam channels: 32 channels Beam pitch: 20mm Large multi-purpose indicator: Mounted Cable specification: Relay connector type © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 90: Specifications

    Relay con- Approx. 680g Approx. 750g Approx. 840g Approx. 910g receiver) nector type PFHd: Probability of dangerous failure per hour, MTTFd: Mean time to dangerous failure. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 91 Relay con- Approx. 1,700g Approx. 1,800g Approx. 1,900g receiver) nector type PFHd: Probability of dangerous failure per hour, MTTFd: Mean time to dangerous failure. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 92 Relay con- Approx. 1,100g Approx. 1,300g Approx. 1,400g Approx. 1,600g receiver) nector type PFHd: Probability of dangerous failure per hour, MTTFd: Mean time to dangerous failure. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 93 Relay con- Approx. 1,700g Approx. 1,800g Approx. 1,900g receiver) nector type PFHd: Probability of dangerous failure per hour, MTTFd: Mean time to dangerous failure. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 94 10 to 55Hz frequency, 0.75mm amplitude in X, Y, and Z directions for two hours each Vibration resistance acceleration (Approx. 30G) in X, Y and Z directions for three times each Shock resistance 300m/s © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 95 2) When the synchronization + wire (orange) and synchronization - wire (orange / black) is extended with a cable other than exclusive cable, use a 0.2mm or more shielded twisted pair cable. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com...

  • Page 96: Options

    Use one hexagon head bolt [M5] when installation space is MS-SF4BC-3 limited. <Accessory> Hexagon-socket head bolt [M3 (length: 6mm)]: 8 pcs. M5 flat washer: 4 pcs. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 97 Note: The numbers of sets required by SF4B-H□C□ (40 or more beam axes) and SF4B-A□C□ (20 or more beam axes) are as follows: SF4B-H40C□, SF4B-H48C□, SF4B-H56C□, SF4B-A20C□, SF4B-A24C□, SF4B-A28C□: 1 set SF4B-H64C□, SF4B-H72C□, SF4B-H80C□, SF4B-H88C□, SF4B-H96C□, SF4B-A32C□, SF4B-A36C□, SF4B-A40C□, SF4B-A44C□, SF4B-A48C□: 2 sets © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 98 ● Test rod: 1 pc. Model No. Remarks Test rod for SF4B-A□C□. ø45mm SF4B-TR45 It can be also used for SF4B-H□C□ 1 beam channel floating. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 99: Dimensions

    1,623.4 1,639 1,580 1,560 1,068 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,814.4 1,783.4 1,799 1,740 1,720 1,175 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,974.4 1,943.4 1,959 1,900 1,880 1,282 Type 21.7 SF4B-H□C□ SF4B-A□C□ 41.7 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 100 1,623.4 1,639 1,580 1,560 1,063 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,814.4 1,783.4 1,799 1,740 1,720 1,170 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,974.4 1,943.4 1,959 1,900 1,880 1,277 Type 21.7 SF4B-H□C□ SF4B-A□C□ 41.7 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 101: Rear Mounting With Ms-Sf4Bc-2 And Ms-Sf4Bc-4

    1,639 1,580 1,560 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,836.4 1,784.4 578.5 1,179.5 1,799 1,740 1,720 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,996.4 1,944.4 631.5 1,286.5 1,959 1,900 1,880 Type 22.2 SF4B-H□C□ SF4B-A□C□ 42.2 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 102: In Case Mounting In Confined Space With Ms-Sf4Bc

    1,055.9 1,630.4 1,580 1,560 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,784.4 1,765.8 561.9 1,162.9 1,790.4 1,740 1,720 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,944.4 1,925.8 614.9 1,269.9 1,950.4 1,900 1,880 Type 22.2 SF4B-H□C□ SF4B-A□C□ 42.2 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 103: Side Mounting With Ms-Sf4Bc-3 And Ms-Sf4Bc-4

    1,639 1,580 1,560 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,836.4 1,784.4 578.5 1,179.5 1,799 1,740 1,720 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,996.4 1,944.4 631.5 1,286.5 1,959 1,900 1,880 Type 22.2 SF4B-H□C□ SF4B-A□C□ 42.2 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 104: In Case Mounting In Confined Space With Ms-Sf4Bc

    1,055.9 1,630.4 1,580 1,560 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,784.4 1,765.8 561.9 1,162.9 1,790.4 1,740 1,720 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,944.4 1,925.8 614.9 1,269.9 1,950.4 1,900 1,880 Type 22.2 SF4B-H□C□ SF4B-A□C□ 42.2 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 105: And Ms-Sf4Bc

    1,639 1,580 1,560 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,784.4 578.5 1,179.5 1,828.4 1,799 1,740 1,720 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,944.4 631.5 1,286.5 1,988.4 1,959 1,900 1,880 Type 22.2 SF4B-H□C□ SF4B-A□C□ 42.2 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 106: And Ms-Sf4Bc

    1,055.9 1,630.4 1,580 1,560 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,784.4 1,765.8 561.9 1,162.9 1,790.4 1,740 1,720 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,944.4 1,925.8 614.9 1,269.9 1,950.4 1,900 1,880 Type 22.2 SF4B-H□C□ SF4B-A□C□ 42.2 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 107 SF4B-H80C(A-J05) SF4B-A40C(A-J05) 1,654.4 1,623.4 1,639 1,580 1,560 SF4B-H88C(A-J05) SF4B-A44C(A-J05) 1,814.4 1,783.4 1,799 1,740 1,720 SF4B-H96C(A-J05) SF4B-A48C(A-J05) 1,974.4 1,943.4 1,959 1,900 1,880 Type 21.7 SF4B-H□C□ SF4B-A□C□ 41.7 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 108: Mounting Brackets

    2 × M3 mounting hole (for main body mounting) 11.8 21.6 10.8 2 2 × M3 mounting hole (for main body mounting) 11.8 21.6 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 109 2) Rear utility mounting bracket / MS-SF4BC-2 (12) M3 mounting hole 7° 7° (for main body mounting) 23.8 (12) M3 mounting hole (for main body mounting) 7° 7° 23.8 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 110 3) Side utility mounting bracket / MS-SF4BC-3 32.5 M3 mounting hole (for main body mounting) 7° 7° 22.7 32.5 M3 mounting hole (for main body mounting) 7° 7° 22.7 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 111 Dimensions 4) Intermediate support bracket for use with utility mounting bracket / MS-SF4BC-4 <Rear mounting> 30.6 20.6 32.2 20.6 (20.2) 15.5 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 112 Dimensions <Side mounting> 10.5 20.5 27.5 31.5 (28.5) 15.5 t1.5 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 113 5) Intermediate supporting bracket for use with the standard mounting bracket / MS-SF4BC-5 <Rear mounting> 22.8 14.8 2 × M3 mounting hole for flat head screw Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 114 Dimensions <Side mounting> 30.4 22.4 18.7 13.7 6 × M3 mounting hole 13.4 for flat head screw Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 115 Dimensions 6) Side mounting bracket / MS-SF4BC-6 22.3 (26) M3 mounting hole 7° 7° (for main body mounting) 12.5 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 116 Dimensions 22.3 (26) M3 mounting hole (for main body mounting) 7° 7° 12.5 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 117 Dimensions 7) Intermediate supporting bracket for use with side mounting bracket / MS-SF4BC-7 31.5 (28.5) t1.5 15.5 37.2 27.5 17.2 13.2 20.8 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 118 1,159 MS-SF4BCH-64 1,334.4 1,304.4 1,180.4 1,319 MS-SF4BCH-72 1,494.4 1,464.4 1,340.4 1,479 MS-SF4BCH-80 1,654.4 1,624.4 1,500.4 1,639 MS-SF4BCH-88 1,814.4 1,784.4 1,660.4 1,799 MS-SF4BCH-96 1,974.4 1,944.4 1,820.4 1,959 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 119: Chapter 7 Others

    Safety distance chine can be stopped before a human body or an object can reach the dangerous parts. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 120 The abbreviation for the Presence Sensing Device Initiation. The safety device that restarts automatically without any operation PSDI by the operator after the device detects danger status and halts for a while. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...

  • Page 121: Ce Marking Declaration Of Conformity

    CE Marking Declaration of Conformity 7-2 CE Marking Declaration of Conformity Itemized Essentials of EC Declaration of Conformity Manufacturer’s Name: Panasonic Industrial Devices SUNX Co., Ltd Manufacturer’s Address: 2431-1, Ushiyama-cho, Kasugai, Aichi 486-0901, Japan EC Representative’s Name: Panasonic Marketing Europe GmbH Panasonic Testing Center EC Representative’s Address: Winsbergring 15, 22525 Hamburg,Germany...
  • Page 122 : May 22, 2013 Second edition : August 30, 2013 Third edition : November 15, 2013 Forthd edition : May 15, 2014 Fifth edition : June 30, 2014 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com...
  • Page 123 (2) Any Products found to be defective must be shipped to Panasonic Industrial Devices SUNX with all shipping costs paid by Purchaser or offered to Panasonic Industrial Devices SUNX for inspection and examination.
  • Page 124 ■ Overseas Sales Division (Head Office): 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan ■ Telephone: +81-568-33-7861 ■ Facsimile: +81-568-33-8591 panasonic.net/id/pidsx/global About our sale network, please visit our website. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 June 2014 PRINTED IN JAPAN WUME-SF4BC-5 Ramco National 800-280-6933 | nsales@ramcoi.com...

This manual is also suitable for:

Sf4b-h16cSf4b-h24cSf4b-h12ca-j05Sf4b-h16ca-j05Sf4b-h20ca-j05Sf4b-h24ca-j05 ... Show all

Table of Contents