Operation - Panasonic SF4B-H12C Instruction Manual

Adjustment

2-6-3 Operation

1) Normal Operation
The status of the emitter / receiver indicators during normal operation is as described below.
: Blinks in red,
Device status
Light received status
(all beams received)
One or more lights
blocked
Notes: 1) Since the color of the operation indicator changes according to ON / OFF status of the control output
(OSSD 1 / 2), the operation indicator is marked as "OSSD" on the device.
2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set-
ting mode. In case of NPN output setting mode, the NPN indicator (orange) lights up.
66
Ramco National
: Lights up in red, : Lights up in orange,
Emitter
(Note 1)
(Note 2)
(Note 1)
(Note 2)
800-280-6933 | nsales@ramcoi.com
: Lights up in green,
Indicators
Receiver
(Note 2)
(Note 2)
© Panasonic Industrial Devices SUNX Co., Ltd. 2014
www.panasonicsensors.com
: Turns OFF
Control output
OSSD 1 OSSD 2
ON
OFF