Panasonic SF4B-H12C Instruction Manual page 62

Wiring
<In case of using I/O circuit for NPN output with SF4B-□CA-J05>
Gray cable
Gray cable
with black line
Interlock function
External device monitor function Valid
Auxiliary output
The device output is selected depending on the connecting state of the output polarity setting wire
(shield). Incorrect wiring may cause the lockout state.
* Symbols
Switch S1
● Emission halt input / Reset input
0 to +1.5V (source current 5mA or less): Emission, Open: Emission halt
Switch S2
● Muting input A / B, Override input
0 to + 1.5V (source current: 5mA or less): Valid, Open: Invalid
K1, K2: External device (Forced guided relay or magnetic contactor)
62
Ramco National
(Gray) NC
(Gray / Black) Large multi-purpose indicator input (Emitter side)
(Pale purple) Interlock setting input
(Brown) +V
(Yellow-green / Black) Auxiliary output
(Shield) Output polarity setting wire
(Red) Muting auxiliary output
(Yellow) Override input
(Pink) Emission halt input / Reset input
(Blue) 0V
(Orange) Synchronization +
(Orange / Black) Synchronization -
(Orange / Black) Synchronization -
(Orange) Synchronization +
(Yellow-green) External device monitor input
(Brown) +V
(Black) Control output 1 (OSSD 1)
(White) Control output 2 (OSSD 2)
(Shield) Output polarity setting wire
(Sky-blue / White) Muting input A
(Sky-blue / Black) Muting input B
(Blue) 0V
(Gray / Black) Large multi-purpose indicator input (Receiver side)
(Gray) NC
Invalid (Auto-reset)
Can be used
800-280-6933 | nsales@ramcoi.com
Load
Load
*S1
K1
K1
K2
*S2
© Panasonic Industrial Devices SUNX Co., Ltd. 2014
www.panasonicsensors.com
+
24V DC
±10%
-
*S2
K2
*S2