Download
Share
Print this page
Panasonic SF4B-H96CA-J05 Instruction Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Lighting Equipment
  5. SF4B-H96CA-J05
  6. Instruction manual
Panasonic SF4B-H96CA-J05 Instruction Manual

Panasonic SF4B-H96CA-J05 Instruction Manual

Compact light curtain / type 4
Hide thumbs

Advertisement

Quick Links

Download this manual
Need technical support for connecting your
compact light curtain? Looking for safety relays
with force-guided contacts?
Contact the experts at Ramco today!
Our email address is nsales@ramcoi.com
WUME-SF4BC-5
2014.6
Ramco National
Compact Light Curtain / Type 4
Instruction Manual
800-280-6933
www.panasonicsensors.com

Advertisement

loading

Related Manuals for Panasonic SF4B-H96CA-J05

Summary of Contents for Panasonic SF4B-H96CA-J05

  • Page 1 Compact Light Curtain / Type 4 Instruction Manual Need technical support for connecting your compact light curtain? Looking for safety relays with force-guided contacts? Contact the experts at Ramco today! Our email address is nsales@ramcoi.com WUME-SF4BC-5 2014.6 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 2 (MEMO) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 3 3) Though we have carefully drawn up the contents of this instruction manual, if there are any as- pects that are not clear, or any error that you may notice, please contact our local Panasonic © Panasonic Industrial Devices SUNX Co., Ltd. 2014...
  • Page 4 ···································· 3-8 Functions Using Handy Controller ( ) (Optional) ······················ Chapter 4 Maintenance····································································· 4-1 Daily Inspection ·········································································· 4-2 Periodic Inspection (Every Six Months)············································ 4-3 Inspection after Maintenance························································· © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 5 6-3-5 Side Mounting with ··················· ································································ 6-3-7 Mounting with ·························· ································································ 6-3-9 Mounting with ························ 6-3-10 Mounting Brackets······························································ Chapter 7 Others··········································································· 7-1 Glossary ················································································· 7-2 CE Marking Declaration of Conformity··········································· © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 6 Note that this device may be damaged if it is subject to a strong shock (if it is dropped onto Use this device by installing suitable protection equipment as a countermeasure for failure, Before using this device, check whether the device performs properly with the functions and © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 7 Install this device such that some part of the operator’s body always remains in the sens- When installing multiple sets of this device, connect the sets and, if necessary, install some barri- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 8 The periodical inspection of this device must be performed by an engineer having the spe- After maintenance or adjustment, and before starting operation, test this device following Do not use this device to detect transparent objects, translucent objects or objects smaller © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 9 ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508 S1-G-35-2005, S2-W-11-2003 The cTUVus mark “ mark on the In Japan, never use this device as a safety equipment for any press machine or shearing ma- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 10 If one type of control output (OSSD) is used, the auxiliary output connects to PLC to monitor the operation of this device, and construct the control system that can stop a device if discrepancy SF4B-H , SF4B-H (ø25 × 220mm) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 11 Refer to “ Receiver Large multi-purpose indicator Standard mounting bracket (only (Optional) Beam channel Emitter Display section Large multi-purpose indicator (only Gray cable with black line Display section Gray cable © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 12 Incident light intensity Incident light intensity Large multi-purpose Beam-axis indicator alignment SF4B- indicator only Emission intensity Function setting indicator Display section Emission halt indicator Interlock indicator Bottom end © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 13 2) Since the color of the operation indicator changes according to ON / OFF status of the control output 3) The blanking function is set by using the handy controller ( © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 14 Bottom Sensing range Protective structure Sensing area Dangerous part Dangerous part Sensing area Sensing Sensing Dangerous Dangerous area area part part © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 15 The safety distance is calculated based on the equation described in the next page when a per- Safety distance S Sensing area Dangerous part Intrusion direction © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 16 T = T SF4B SF4B : Additional distance calculated from the size of the minimum sensing object of the device (mm) C = 850 (mm) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 17 Since this value matches with Case 2) above, S is 316 (mm) S = 2,000 × T + 116 = 916 Since this value matches with Case 3) above, S = 1,600 × T © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 18 = 63 × (T = 63 × (T = 63 × T = 63 × T = 63 × T = 63 × T Hence, as per the calculations D © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 19 Distance between emitter and receiver (Sensing range L) Allowable installation distance A 3 to 7m Install in this area Do not install in this area Distance between emitter and receiver © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 20 Receiver Receiver Emitter Emitter Receiver Receiver Emitter 3) Arrange the emitter and the receiver horizontally 4) Install a barrier Receiver Receiver Emitter Receiver Emitter Emitter Emitter Barrier Receiver © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 21 Cable Cable Cable Cable © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 22 After installing the product with the mounting brackets, verify that the incident light indicator is face by referring to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 23 Step 2 Mount the standard mounting bracket on the mounting surface using hexagon-socket Hexagon-socket head bolt Hexagon-socket head bolt Main body Main body Note: Use M5 washers (accessory of © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 24 (Purchase separately) Main body Main body Note: : 48 beam channels or more, : 24 beam channels or more require intermediate supporting bracket for use with standard mounting bracket © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 25 If installation space is limited, tighten the hexagon head bolts to secure the product to Hexagon head bolt Hexagon-socket head bolt Main body Main body Note: Use M5 washers (accessory of © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 26 If installation space is limited, tighten the hexagon head bolts to secure the product to Hexagon head bolt Hexagon-socket head bolt Main body Main body Note: Use M5 washers (accessory of © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 27 Hexagon-socket head bolt Bracket A Bracket B Rear mounting bracket Bracket A Main body Bracket A Bracket B Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 28 Hexagon head bolt Main body Main body Note: : 48 beam channels or more, : 24 beam channels or more require intermediate supporting bracket for use with utility mounting bracket © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 29 Step 2 Mount the side mounting bracket on the mounting surface using hexagon-socket head Hexagon-socket head bolt Hexagon-socket head bolt Main body Main body Notes: 1) Use M5 washers (accessory of 2) When mounting a side mounting bracket Projection Projection © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 30 When mounting to an aluminum frame, refer to the positioning mark on a side mounting bracket Side mounting bracket (Optional) Main body Aluminum frame Side mounting bracket (Optional) (24mm) Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 31 Hexagon-socket head bolt Bracket A Bracket B Bracket C Bracket A Main body Bracket A Bracket B Main body Bracket A Bracket B Bracket C Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 32 Hexagon-socket head bolt Main body Note: : 48 beam channels or more, : 24 beam channels or more require intermediate supporting bracket for use with side mounting bracket © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 33 (optional), in accordance with the Intermediate supporting bracket for use with side mounting bracket (Optional) Main body Aluminum frame Intermediate supporting bracket for use with side mounting bracket (Optional) Main body (24mm) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 34 (Optional) Main body Step 2 Mount the standard mounting bracket to the machine using two hexagon-socket head Hexagon-socket head bolts (Accessory of Standard mounting bracket (Optional) Main body © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 35 Main body Notes: 1) Use M5 washers (accessory of 2) Be careful to prevent the machine from slipping out of the protective metal case while assembling it to © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 36 3) Power supply unit conforming to the Low-voltage Directive and with an output of 100VA 6) In case a surge is generated, take countermeasures such as connecting a surge ab- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 37 (Shield) Output polarity setting wire (Blue) 0V Internal circuit Users’ circuit Switch S1 Emission halt input / Reset input Interlock setting input K1, K2: External device (Forced guided relay or magnetic contactor) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 38 K1 K2 (Blue) 0V Internal circuit Users’ circuit Switch S1 Emission halt input / Reset input Interlock setting input K1, K2: External device (Forced guided relay or magnetic contactor) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 39 (Gray / Black) Large multi-purpose indicator input (Receiver side) (Black) Control output 1 (OSSD 1) (White) Control output 2 (OSSD 2) (Shield) Output polarity setting wire (Blue) 0V Internal circuit Users’ circuit © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 40 Interlock setting input, Override input, Muting input A / B, External device monitor input Large multi-purpose indicator input K1, K2: External device (Forced guided relay or magnetic contactor) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 41 (Receiver side) (Gray) NC K1 K2 (Yellow-green) External device monitor input (Sky-blue / White) Muting input A (Sky-blue / Black) Muting input B (Blue) 0V Internal circuit Users’ circuit © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 42 Interlock setting input, Override input, Muting input A / B, External device monitor input Large multi-purpose indicator input K1, K2: External device (Forced guided relay or magnetic contactor) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 43 When extending the cable, use the exclusive cable up to the total length of 50m (for each emit- When the synchronization + wire (orange) and synchronization - wire (orange / black) is extend- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 44 Connector for emitter: gray, connector for receiver: black For details of the cable with connector on one end, and the cable with connector on both ends, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 45 (Black) Control output 1 (OSSD 1) (White) Control output 2 (OSSD 2) (Shield) Output polarity setting wire (Blue) 0V Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 46 (Black) Control output 1 (OSSD 1) (White) Control output 2 (OSSD 2) (Shield) Output polarity setting wire (Blue) 0V Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 47 (Sky-blue / Black) Muting input B (Gray / Black) Large multi-purpose indicator input (Receiver side) (Gray) NC Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 48 (Sky-blue / Black) Muting input B (Gray / Black) Large multi-purpose indicator input (Receiver side) (Gray) NC Interlock function Invalid (Auto-reset) External device monitor function Invalid Auxiliary output Cannot be used © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 49 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) 2) For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 50 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 51 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) 2) For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 52 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 53 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) 2) For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 54 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 55 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) 2) For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 56 The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 K1, K2: External device (Forced guided relay or magnetic contactor) Note: For resetting, refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 57 External device monitor function Invalid Auxiliary output Cannot be used The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 58 External device monitor function Invalid Auxiliary output Cannot be used The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 59 External device monitor function Invalid Auxiliary output Cannot be used The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 60 External device monitor function Invalid Auxiliary output Cannot be used The device output is selected depending on the connecting state of the output polarity setting wire * Symbols Switch S1 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 61 * Symbols Switch S1 Emission halt input / Reset input Switch S2 Muting input A / B, Override input K1, K2: External device (Forced guided relay or magnetic contactor) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 62 * Symbols Switch S1 Emission halt input / Reset input Switch S2 Muting input A / B, Override input K1, K2: External device (Forced guided relay or magnetic contactor) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 63 Hexagon socket head bolt (Optional) Intermediate supporting bracket for use with side mounting bracket (Optional) Utility mounting bracket (Optional) (for rear) Hexagon socket head bolt (for side) Side mounting bracket (Optional) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 64 (OSSD 1 / 2) turns ON, all the four indicators of the beam-axis alignment indi- Refer to “ Verify that the beam-axis alignment indicator and incident light intensity indicator on the © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 65 / receiver indicators do not correspond to the movement of the test rod, refer to “ If the indicators show reception of the light even though the test rod blocks the light, check wheth- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 66 Notes: 1) Since the color of the operation indicator changes according to ON / OFF status of the control output 2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 67 Notes: 1) Since the color of the operation indicator changes according to ON / OFF status of the control output 2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 68 Notes: 1) Since the color of the operation indicator changes according to ON / OFF status of the control output 2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 69 Notes: 1) Since the color of the operation indicator changes according to ON / OFF status of the control output 2) The status of the emitter / receiver indicators during operation above shows the case in PNP output set- © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 70 Since this device will not return to normal operation automatically after the removal of the (Source of error): The control output (OSSD) short-circuit, extraneous light detection, sensor Refer to “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 71 The control output (OSSD 1 / 2) is turned ON automatically when this device It is possible to change the conditions for interlocking by using the handy controller ( © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 72 14ms or less 90ms or less Control output (OSSD 1 / 2) Do not use the emission halt function for the purpose of stopping the machine in which the © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 73 Connect the external device monitor input wire (yellow-green) to the auxiliary output wire It is also possible to set the external device monitor function into ‘invalid’ by using the handy con- troller ( © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 74 External device monitor input Lockout state 90ms or less Light Light received received status Light blocked Control output (OSSD 1 / 2) 300ms External device monitor input Lockout state © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 75 The following devices, photoelectric sensor with semiconductor output, inductive proximity sen- ) (optional) and connecting NO (Normally Open) type muting sensor to the input A, as well as connecting NC (Normally Closed) type © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 76 Muting sensor B Muting sensor D Muting input A Muting input B Muting sensor A Muting sensor C Muting sensor B Muting sensor D Muting input A Muting input B © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 77 (Orange / Black) Synchronization - (Orange / Black) Synchronization - (Orange) Synchronization + (Brown) +V Gray cable (Blue) 0V with black line (Gray / Black) Large multi-purpose indicator input (Receiver side) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 78 The override input shall be short-circuited to 0V or +V, and the emission halt input / reset in- ) (optional), the timing can be changed in the range of ) (optional), © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 79 14ms or less Override function Sensing object Absent W i t h i n t h e protection are Present 90ms or less Control output (OSSD 1 / 2) Note: © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 80 The two modes, normal mode and short mode, can be set / changed by controlling the emis- 2) This device outputs the light received / blocked state under activating the auxiliary output switching © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 81 To make the muting function valid, time difference between the time during muting input A becomes ON from OFF (Open) and the time during muting input B becomes OFF © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933...
  • Page 82 5) The muting function will be invalid if the muting sensor which is connected to the muting input of this device differs from the output operation which is set with the handy controller ( © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 83 (A), The control output (OSSD 1 / 2) must turn OFF when the emission halt input / reset input wire (pink) © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 84 Check column Inspection item Under the following situations, perform all the inspection items mentioned in “ ” and “ © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 85 - wire (orange / black) is extend- supply or failure of internal Internal circuit is broken ed with a cable other than exclusive cable, use a circuit © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 86 Note: Since the color of the operation indicator changes according to ON / OFF status of the control output (OSSD If the device does not work normally after checking the items above, please consult Panasonic © Panasonic Industrial Devices SUNX Co., Ltd. 2014...
  • Page 87 Wire the output polarity setting wire (shield) cor- Output polarity setting wire Output polarity setting wire Wire the output polarity setting wire (shield) of the (shield) error (shield) connection of emitter © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 88 Connect synchronization + wire (orange) or syn- Synchronization + wire (orange) or synchronization - wire Refer to “ If the device does not work normally after checking the items above, please consult Panasonic © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 89 Blank: Cable type, : Relay connector type Blank: Unmounted, : Mounted H: 20mm, : 40mm Example: Number of beam channels: 32 channels Beam pitch: 20mm Large multi-purpose indicator: Mounted © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 90 Receiver: 110mA or less dicator lights up PFHd MTTFd More than 100 years Weight (to- Cable type tal of emit- t e r a n d Relay con- receiver) nector type © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 91 Receiver: 155mA or less dicator lights up PFHd MTTFd More than 100 years Weight (to- Cable type tal of emit- t e r a n d Relay con- receiver) nector type © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 92 Emitter: 80mA or less, Receiver: 95mA or less Emitter: 85mA or less, Receiver: 105mA or less dicator lights up PFHd MTTFd More than 100 years Weight (to- Cable type tal of emit- t e r a n d Relay con- receiver) nector type © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 93 Receiver: 105mA or less dicator lights up PFHd MTTFd More than 100 years Weight (to- Cable type tal of emit- t e r a n d Relay con- receiver) nector type © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 94 Ambient humidity 30 to 85%RH, Strage: 30 to 85%RH Ambient illuminance Operating altitude 2,000m or less (Note 1) Voltage with standability Insulation resistance Vibration resistance Shock resistance 300m/s © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 95 Notes: 1) Do not use or store the device in an environment where the air pressure is higher than the atmospheric 2) When the synchronization + wire (orange) and synchronization - wire (orange / black) is extended with © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 96 This mounting bracket allows the device to be mounted at Remarks This mounting bracket lets you adjust the beam axis and Remarks This mounting bracket lets you adjust the beam axis and © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 97 This bracket is used to support the middle of the unit when This mounting bracket lets you adjust the beam axis and Note: The numbers of sets required by SF4B-H axes) are as follows: © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 98 Handy controller that enables setting European / North American safety When used for cable type Cable set (optional) for Remarks Test rod for It can be also used for © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 99 (with black line) (45) SF4B-H 1,159 1,100 1,080 1,319 1,260 1,240 1,479 1,420 1,400 1,639 1,580 1,560 1,068 1,799 1,740 1,720 1,175 1,959 1,900 1,880 1,282 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 100 (with black line) (45) SF4B-H 1,159 1,100 1,080 1,319 1,260 1,240 1,479 1,420 1,400 1,639 1,580 1,560 1,063 1,799 1,740 1,720 1,170 1,959 1,900 1,880 1,277 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 101 ø5 Gray cable (with black line) (45) SF4B-H 1,159 1,100 1,080 1,319 1,260 1,240 1,479 1,420 1,400 1,639 1,580 1,560 1,799 1,740 1,720 1,959 1,900 1,880 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 102 (Unit: mm) ø5 Gray cable ø5 Gray cable (with black line) (45) SF4B-H 1,100 1,080 1,260 1,240 1,420 1,400 1,580 1,560 1,740 1,720 1,900 1,880 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 103 ø5 Gray cable (with black line) (45) SF4B-H 1,159 1,100 1,080 1,319 1,260 1,240 1,479 1,420 1,400 1,639 1,580 1,560 1,799 1,740 1,720 1,959 1,900 1,880 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 104 (Unit: mm) ø5 Gray cable ø5 Gray cable (with black line) (45) SF4B-H 1,100 1,080 1,260 1,240 1,420 1,400 1,580 1,560 1,740 1,720 1,900 1,880 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 105 ø5 Gray cable (with black line) (45) SF4B-H 1,159 1,100 1,080 1,319 1,260 1,240 1,479 1,420 1,400 1,639 1,580 1,560 1,799 1,740 1,720 1,959 1,900 1,880 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 106 (24) (39) (39) ø5 Gray cable ø5 Gray cable (with black line) (45) SF4B-H 1,100 1,080 1,260 1,240 1,420 1,400 1,580 1,560 1,740 1,720 1,900 1,880 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 107 ø5 Gray cable (with black line) (45) SF4B-H 1,159 1,100 1,080 1,319 1,260 1,240 1,479 1,420 1,400 1,639 1,580 1,560 1,799 1,740 1,720 1,959 1,900 1,880 Type SF4B-H © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 108 (Unit: mm) 2 × M3 mounting hole (for main body mounting) 2 × M3 mounting hole (for main body mounting) Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 109 (12) M3 mounting hole (for main body mounting) (12) M3 mounting hole (for main body mounting) Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 110 M3 mounting hole (for main body mounting) M3 mounting hole (for main body mounting) Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 111 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 112 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 113 2 × M3 mounting hole Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 114 6 × M3 mounting hole Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 115 (26) M3 mounting hole (for main body mounting) Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 116 (26) M3 mounting hole (for main body mounting) Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 117 Material: Stainless steel © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 118 Material: Stainless steel 1,159 1,319 1,479 1,639 1,799 1,959 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 119 Safety distance chine can be stopped before a human body or an object can reach © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 120 (OSSD) for the receiver while light from the emit- function ter is being received The safety device that restarts automatically without any operation PSDI by the operator after the device detects danger status and halts for © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 121 - IEC 61508-3: 2010 - IEC 61508-4: 2010 - EN ISO 13849-1: 2008 - EN 50178: 1997 - EN 55011: 2009 +A1: 2010 - EN 61000-6-2: 2005 65 80339 München Germany © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 122 : May 22, 2013 Second edition : August 30, 2013 Third edition : November 15, 2013 Forthd edition : May 15, 2014 Fifth edition : June 30, 2014 © Panasonic Industrial Devices SUNX Co., Ltd. 2014 Ramco National 800-280-6933 www.panasonicsensors.com...
  • Page 123 Products to be free of defects in material and workmanship for a period of one (1) year from the (2) Any Products found to be defective must be shipped to Panasonic Industrial Devices SUNX with all shipping Upon examination by Panasonic Industrial Devices SUNX, Panasonic Industrial Devices SUNX will, at its sole...
  • Page 124 Overseas Sales Division (Head Office): 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Telephone: +81-568-33-7861 Facsimile: +81-568-33-8591 panasonic.net/id/pidsx/global About our sale network, please visit our website. © Panasonic Industrial Devices SUNX Co., Ltd. 2014 June 2014 PRINTED IN JAPAN WUME-SF4BC-5 Ramco National 800-280-6933...

This manual is also suitable for:

Sf4b-h12cSf4b-h16cSf4b-h20cSf4b-h24cSf4b-h12ca-j05Sf4b-h16ca-j05 ... Show all